castings - Globe Thesis

Keyword [castings] Result: 161 - 180 \| Page: 9 of 10
161.	Mathematical modeling of microshrinkage formation during solidification of A356 alloy castings
162.	Experimental and numerical study of the effect of mold vibration on aluminum castings alloys
163.	A pattern allowance advisor tool for steel castings
164.	Quality control and improvement of the aluminum alloy castings for the next generation of engine block cast components
165.	The effect of LFC process variables on solidification and thermal response of AZ91E magnesium alloy castings
166.	Effect of cooling rate, strontium modification, melt thermal treatment and solution heat treatment on the eutectic silicon particle characteristics and tensile properties of A356 alloy
167.	Directional solidification of large cross-section nickel-base superalloy castings via liquid-metal cooling
168.	Modeling of reoxidation inclusion formation in casting of steel
169.	Inverse segregation and near-surface microstructure development in aluminum-copper alloy castings
170.	Numerical simulation of filling and solidification of permanent mold castings
171.	Probabilistic simulation of hydrogen gas porosity formation in A356 base hypoeutectic alloy castings
172.	A study of porosity quantification techniques and pore morphology in aluminum alloy castings
173.	Prediction of selected mechanical properties of ferrous alloys through computational modeling of solidification
174.	The use of chills as a means of influencing solidification in lost foam cast aluminum alloy A356
175.	Study of auxins in earthworms and in media containing earthworms castings as related to plant growth of marigold (Tagetes erecta) (Eisenia fetida andrei)
176.	Optimization of rigging design for small, simple A356 aluminum castings using AFsolid
177.	Using design of experiment (DOE) to reduce shrinkage porosity rejects in aluminum alloy automotive wheel castings
178.	Studies on the mechanisms of heterogeneous nucleation of grains and pores in aluminum castings
179.	Influence of process parameters on microstructure and mechanical properties of lost foam aluminum castings. (Volumes I and II)
180.	The relation of solidification parameters to microporosity in aluminum-4.5percent copper alloy castings
<<First <Prev Next> Last>> Jump to