Font Size: a A A
Keyword [blowing]
Result: 1 - 20 | Page: 1 of 10
1. Study On The Air Drawing In Melt Blowing Nonwoven Process
2. Preparation Of The Physical Blowing Microcapsule And Its Application In Three-Dimensional Printing
3. Mathematical And Physical Modeling Of Multifunction RH Refining Process
4. Study Of The Effects Of Airflow On Fiber Motion And The Adhesive Web Quality In Melt Blowing Process
5. Studies On Multiphase Flow Transport Phenomena In Several Chemical And Metallurgical Reactors
6. Research On Refining Slag Composition Optimizing And Industrial Practice Of Deep Desulphurization In LF
7. Control Of Chemical Composition And Inclusions In IF Steel
8. Study On Dispersed Phase Distribution In Continuous Phase In Steelmaking Converter
9. On The Non-metallic Inclusions In The Ni-based Alloys And Their Removing Technology
10. Mathematical And Physical Modeling Of Fluid Flow Phenomena In An AOD Converter Bath With Side And Top Combined Blowing
11. Preparation Of Epdm Foams And Study On Its Structure And Properties
12. An Investigation Into Some Aspects Relating To The Design Of Melt Blowing Nonwoven Die
13. Numerical Simulation For The Interfacial Behavior Of Steel And Slag In A Slab Continuous Casting Mold With High Casting Speed
14. Development Of Slot-bottom Powder Injection Device And Study On Characteristics Of Gas-Particle Flow In Bottom-Blowing Ladle
15. The Study Of Several Dynamic Issues During Initial Solidification In Continuous Casting
16. Investigation Of Micro-Nano Fiber Formation
17. Oxidation Refining Metallurgical Preparation Of Solar Grade Silicon Process In Addition To Boron Application Of Basic Research
18. Technology Research Of Recycling Ammonium Chloride From Waste Water Of Glycine Producing And Treatment Of Condensed Water
19. Computer Simulation For Flow Of Plastic Melts And Film Bolwing
20. Optimization Study Of LF Process In Jiuquan Iron & Steel Corp.
  <<First  <Prev  Next>  Last>>  Jump to