attrition - Globe Thesis

Keyword [attrition] Result: 21 - 40 \| Page: 2 of 7
21.	Study On Preventing Eccentric Attrition Between The Sucker Rod And Tubing In 3D Wellbore
22.	Preparation Of High Performance Nano Quinacridone Pigment
23.	Experimental Research On Fragmentation And Attrition Characteristic Of Oil Shale In Fluidized Bed
24.	Study On The Preparation Mechanism And Technology Development Of Highly Effective Sorbent
25.	Mechanism Analysis Of Uneven Abrasion For High Pour-point Oil Wells And Application Of Its Prevention Technology
26.	Mechanism Of Leaning Attrition In Pumping Units Well And Prevention Technology
27.	Investigation Of Relative Problems About Pure Iron Surface Mechanical Attrition Treatment And First-principles Calculations Of Carbon Monoxide Surface Absorption
28.	Study On The Anti-attrition Mechanism Based On Different Nano-lubricant Additives
29.	The Abrasive Resistance Study About The Cutting Picker Of Coal Cutter
30.	Study On Mechanical Properties Of Copper Alloy With Surface Mechanical Grinding
31.	Effect Of Surface Mechanical Grinding On Microstructure And Mechanical Properties Of Pure Copper
32.	Study On Mechanical Properties Of Pure Titanium In Large Plastic Deformation
33.	A Syudy On The Mechanism Of Attrition Between Highly-mineralized Water And Al-Mn Alloy Of Different Manganese Contents
34.	Investigation On The Corrosion Behavior Of Low Carbon Steel Induced By Surface Mechanical Attrition Treatment
35.	Improvement In Floatability Of Weathered Coal By Attrition Pretreatment
36.	The Study Of The Reason And Prevent Steps About The Attrition Phenomenon Of Pumping Units Wellâ€™s Pole And Tubeâ€™s
37.	Study On Mechanical Behavior Of Pure Iron Subjected To Surface Mechanical Attrition Treatment And Nitriding
38.	Toothed Ring The Material Hal61-4-3-1 Copper Alloy Development
39.	Microstructure And Mechanical Properties Of AZ31Mg Alloy With Surface Mechanical Attrition Treatment
40.	The Effect Of Surface Mechanical Attrition Treatment On The Sliding Wear Behavior Of AZ31 Wrought Magnesium Alloy
<<First <Prev Next> Last>> Jump to