adiabatic shear - Globe Thesis

Keyword [adiabatic shear] Result: 1 - 20 \| Page: 1 of 7
1.	Study On Microcosmic Mechanism Of Adiabatic Shear Behavior In Orthogonal Cutting Of High Strength Steel
2.	Studies On The Microstructure Evolution And Collective Behavior Of Adiabatic Shear Bands In Titanium And Its Alloy
3.	Prediction Of Adiabatic Shear In High Speed Machining Based On Linear Pertubation Analysis
4.	Research On Mechanism Of Segmentation Chip Formation In High Speed Cutting
5.	Deformation And Damage Behaviors Of Solution Treated AM60B Magnesium Alloy Under High Velocity Impact
6.	Investigation On The Plastic Characteristics Of A Mg-Gd-Y Alloy
7.	Strain Gradient Effects On Adiabatic Shear Deformation Localization Of Particle Reinforcing Metal Matrix Composites
8.	Investigation On Bonding Interface Of Explosive Welding Dissimilar Metal
9.	The Research Of The Typical Metal Materials High-Speed Cutting Mainly Deformed Zone Adiabatic Shear
10.	Hot Deformation Mechanisms Of O Phase Alloy Using Processing Maps
11.	The Experimental Study And Computer Simulation In High Speed Cutting Of 4Cr5MoSiV1 Hardened Steel
12.	Study On Microscopic Mechanism Of Instability In The Primary Shear Zone During High Speed Machining Hardened Steel
13.	Study Of Structure Changes In Adiabatic Shear Band And Forming Mechanism Of Saw-toothed Chip In Cutting Titanium Alloy
14.	Study On The Damage Behavior Of The 7050 Aluminum Alloy Under High Velocity Impact Conditions
15.	The Study Of Saw Tooth Chip On Super-Hard Alloy 7A04 Of High Speed Mill
16.	Microstructure Evolution Of Adiabatic Shear Bands In AISI201Austenitic Stainless Steel
17.	Adiabatic Shearing In TC4Alloy With Lamellar Microstructure And The Ultrafine Grained Titanium
18.	Initiation And Propagation Of Adiabatic Shear Localization
19.	A Study On Damage Law Of Adiabatic Shear Failure Of Speed Cutting Process
20.	Research On Dynamic Response Of Meta-stable Î²Ti-5553Alloy Under Shock Wave Loading
<<First <Prev Next> Last>> Jump to