additional - Globe Thesis

Keyword [additional] Result: 181 - 200 \| Page: 10 of 10
181.	Study On Compressed Arch Of Anchor Rod And Reasonable Support Parameters In Deep Mudstone Roadway
182.	Analysis On The Influence Of Prestressed Bolt Support Parameters Of Deep Argillaceous Sandstone On Compression Arch Of Deep Roadway
183.	Study On Compression Arch And Reasonable Parameters Of Prestressed Anchor Rod In Deep Coal Roadway Side
184.	Study On The System Of Imposing Fines On Environmental Protection Administration
185.	Acid Production From Cyanobacteria By Anaerobic Fermentation And Its Application As Additional Carbon Source For Denitrification
186.	A Study On The Influencing Factors And Countermeasures Of Directional Additional Issuance In New Third Board LONG CHUANG Company
187.	Process And Control Of Double-wire MIG Welding Additive Manufacturing By Additional Protective Gas
188.	Effect Of Printing Parameters On The Construction Performance Of 3D Printing Cement-based Materials
189.	Study On Treatment Of Low C/N Domestic Sewage Of Inverted A~2/o-MBR Process
190.	Research And Finite Element Realization Of Cyclic Ratcheting Constitutive Model Based On Plastic Strain Memory Recovery
191.	Research On CMT Arc Additive Manufacturing Forming Technology Of Typical Thin-walled Structural Parts
192.	Theoretical Study Of CO₂ Reduction Reaction Catalyzed By An Additional Electronic System
193.	The cryogenic bonding evaluation at the metallic-composite interface of a composite overwrapped pressure vessel with additional impact investigation
194.	Impact of additional carbon on poly-hydroxybutyrates (PHB) accumulation and nutrient removal in a sustainable anaerobic/anoxic/oxic (A2O) membrane bioreactor
195.	Elucidation of chiral recognition mechanisms of solutes by amylose tris[(s)-alpha-methylbenzylcarbamate] sorbent
196.	Highly efficient asymmetric synthesis of novel diphosphine ligands with additional chiral centers on the backbone and their applications in asymmetric hydrogenation reactions
197.	Production and Application of trans, trans CLA-rich Eggs: Chemical and Physiological properties and Prospects for Value-added Foods
198.	Hybrid inorganic-organic materials: Novel poly(propylene oxide)-based ceramers, abrasion-resistant sol-gel coatings for metals, and epoxy-clay nanocomposites, with an additional chapter on: Metallocene-catalyzed linear polyethylene
199.	The synthesis of novel acridine compounds with an additional fused carbonyl-containing ring at the 3,4-position as potential antitumor agents
200.	In situ fluorescence detection of polycyclic aromatic hydrocarbons (PAH) in the marine environment
<<First <Prev Next> Last>> Jump to