Font Size: a A A
Keyword [additional]
Result: 1 - 20 | Page: 1 of 10
1. Design And Synthesis Of Chiral Ligands Based On Carbohydrate And Their Applications In Asymmetric Catalysis
2. Study On The Stability Of Rotating Transfer Under The Control Of Longitudinal Magnetic Field
3. Study On The Technology Of Flue Gas Desulfurization By Scrap Iron And Kinetics Of Fe(Ⅱ) Catalyzed Oxidation Of S(Ⅳ)
4. Experimental And Theoretical Study On Flue Gas Denitrification By DC Corona Oxidation Integrating With Chemical Scrubber
5. Study On Olefin Polymerization Catalyzed By Zirconocene And Composite Support Ziegler-Natta Catalysts
6. A Research On Pseudoelastisity Behavior And Its Microstructure Mechanism Of NiTi SMAs
7. The Influence Of Additional Elements On The Microstructures And Mechanical Properties Of Zr-Cu-base Alloys
8. Injection Mechanism And Application, Of The High Moisture Content Of Sandstone Oil Field Cycle
9. Study On Compact Mechanism Of Pneumatic Compact Spinning With Lattice Apron
10. Effect Of Fiber Geometrical Characteristics On Yarn Unevenness
11. A Study Practice Of High-effective Development Model On Multizone And Low-permeability Petrolem Reservior
12. Preparation Process And Performance Of Bonded Magnet--Rubber Magnet
13. Studied On Start-up Of Additional Gas IC Reactor And Treatment Technology On Printing Ink Wastewater And Municipal Wastewater
14. Study On Single Component Additional Liquid Silicone Potting Material In Electronics Industry
15. Dynamic Analysis On The Stabality Of The Freeze Shaft Lining In Thick Top Soil
16. Design And Research On A Additional Preheating Heat-Exchanging Process For Hot-Blast Stove
17. The Study On The Technology Of The Cotton Compact Spinning
18. The Study Of Compact Mechanism On Cotton Compact Spinning
19. Study On The Method And Equipment Of Hydraulic Expansion With Additional Liquid For 300MWMn18Cr18N Retaining Ring
20. Study Of Fluidizing Behaviors Of Fine Particles Mixing With Additional Particles In A Conical Bed
  <<First  <Prev  Next>  Last>>  Jump to