abrasive particles - Globe Thesis

Keyword [abrasive particles] Result: 1 - 20 \| Page: 1 of 2
1.	Study On The Effect Of Honing Stone On The Honing Efficiency And Its Micro-mechanism
2.	Preparation And Size Classification Of Alumina Series Abrasive Particles For Chemical Mechanical Polishing
3.	Research Of The Dynamic Gasbag Polishing Abrasive Particles Field And Temperature Characteristics
4.	Experimental Analysis And Study Of Magnetic Abrasive Finishing Titanium Alloy Plate
5.	Numerical Simulation Of Abrasive Particles Acceleration Process In Pre-mixed Abrasive Water Jet
6.	The Research On Vacuum Hot Pressed Sintering Preparation And Finishing Characteristic Of Magnetic Abrasive Particles
7.	Research On The Electrolytic-Magnetic Abrasive Finishing Of Nickel-based Superalloy GH4169
8.	Simulaition And Experimental Study On Gruding Machanism Of High-speed Grinding AISI 1045 Steel With Single Abrasive Grain
9.	Study On Preparation Technology And Properties Of Coated Magnetic Abrasive Particles
10.	Study On Dynamic Behavior Of Magnetic Abrasive Particles In Magnetic Induction-free Abrasive Wire Sawing
11.	Basic Experimental Research Of Aluminum And Magnesium Alloys By Magnetic Abrasive Finishing
12.	Study On Uniform Distribution Characteristics Of Diamond Abrasive Particles Based On High Voltage Electrostatic Spraying
13.	Research On Hybrid Finishing Method Of Electrochemical Machining Assisted By Freely Flowing Abrasive Particles
14.	Study On Dynamic Accumulation Process Of Magnetic Abrasive Particles In Magnetic Induction Free Abrasive Wire Sawing
15.	Preparation And Properties Of Magnetic Abrasive Particles By Sol-Gel Method
16.	Study On Abrasive Cleaning Technology For Aluminum Alloy Whell Finishing And Polishing
17.	Research On Abrasive Group Force Transfer Law And Material Removal Characteristics Of Pneumatic Grinding Wheel
18.	Formation Mechanism And Microstucture Analysis Of CBN/Fe-based Spherical Composite Magnetic Abrasive Prepared By Gas Atomization
19.	Simulation Analysis Of Abrasive Belt Wear And Study About The Influence Of Material Removal
20.	Tribological Performance Of CrTiAlN PVD Coatings Under Abrasive Particles Lubrication
<<First <Prev Next> Last>> Jump to