Wall Thickness - Globe Thesis

Keyword [Wall Thickness] Result: 101 - 120 \| Page: 6 of 10
101.	Fabrication And Properties Study Of SiC Hollow Micospheres
102.	Finite Element Simulation Study On Bending Process Of Large-caliber Thick-wall Tube By Induction Heating
103.	Study On The Influence Factors Of Hydroforming Of 5A02 Aluminum Alloy Reducer Tee
104.	Research On Detection Method Of Residual Wall Thickness Of Process Pipeline Corrosion In Oil And Gas Gathering And Transportation Station
105.	Study On The Dynamic Characterisitcs Of Roller-supporting Horizontal Centrifugal Casting Machine And The Influences Of Vibration Of Mould On The Wall Thickness Of Furnace Tubes
106.	Methods And Key Technologies Of Automatic Ultrasonic Thickness Measurement Of Large Thin-wall Parts
107.	Study On Mechanism And Optimization Of Penetration And Fiber Orientation In Short-Fiber-Reinforced Polymer Water-assisted Injection Molding
108.	Simulation Of Temperature / Stress Field In Laser Cladding Of Variable Wall Thickness Parts And Research On Process
109.	Multi-field Coupling Study On Rigid-flexible Helical Surface Between Rigid And Flexible In Progressing Cavity Pumps
110.	Research On Closed-loop Control Of Variable Width Scanning Forming In Inside-laser Powder Feeding
111.	Study On Preparation Of Metal Coatings On Hollow Microspheres And Properties Research
112.	Research On Pressure Distribution Characteristics Of Sheet Metal Viscous Pressure Forming
113.	Continuous Cross-section Pipe Hydraulic Expansion Study
114.	Research On The Influence Of Geometric Shape On The Uniformity Of Single Point Incremental Forming
115.	Analysis Of Bending Rule And Forming Defects Of Metal Pipes
116.	Study On The Change Of Structure And Chemical Composition Of Bamboo During Softening And Flattening
117.	Comparisons Of Morphologies And Tensile Behaviors Between Indonesia And Hainan Island Kapok Fibers
118.	Research On Compound Forming Process Of Flange With Large Wall Tnickness
119.	Study On The Method And Experimental Of Incremental Forming By Non-continuous Contact Between Tooland Sheet Metal
120.	Numerical Simulation Of Stretch Reducing For Hot Rolled Seamless Steel Tubes And Development Of Simulation System
<<First <Prev Next> Last>> Jump to