Wall Thickness - Globe Thesis

Keyword [Wall Thickness] Result: 61 - 80 \| Page: 4 of 10
61.	Study On Rigidity Influence Law Of Over-bending Setting Round For Pipe End Of Large Welded Pipe
62.	Effects Of The Solidification Condition And Cu Concentration On The Microstructure And Mechanical Properties Of A357Alloy Barrel-shape Castings
63.	Study Of CNC Abrasive Belt Grinding Process For Zr-4Alloy Tube’s Wall Thickness Based On Ultrasonic Thick Measure
64.	Research On Thermoplastic Deformation Behavior During Power Spinning For Cast Aluminium Alloy Tube
65.	The Molding Technology Study Of Rare Earth Magnesium Alloy Of Variable Wall Thickness Blade
66.	Research On Tube Bending Mechanical Properties And Its Influential Factors
67.	Research On Thermal Accumulation Due To Butt Welding Of Coiled Tubing With Thin Wall Thickness And Large Diameter
68.	Study Of The Effect Of Central Tube Thickness On Round Liquid Jet Breakup
69.	Study On The Shape And Performance Controllability Of Special-typed Panel Component With Variable Wall Thickness Made By Magnesium Alloys Containing Rare-earth Metals During Forming Procesing
70.	A Study Of The Reason For Casing Corrosion In The Asp Flooding And The Critical Residual Wall Thickness
71.	Thin-wall Thickness Part Turning Analysis And Testing Verification
72.	Effect Of Mechanical Vibration On The Microstructure And Mechanical Properties Of Aluminum Alloy Obtained By Expendable Pattern Shell Casting
73.	Deep Drawing Behavior Of 5052/AZ31/5052 Double Metal Laminated Sheet
74.	Numerical Simulation For Water Penetration In Water-Assisted Injection Molding Based On Two-Phase Flow Principle
75.	The Study Of Forming Parameters And Defects Control During The Synchronous Rotation Mode Ring Spinning Deformation Of Long Cylinders
76.	Effect Of Solidification Conditions Of Low Pressure Casting On Microstruction And Mechanical Properties Of ZL205A Alloy Castings
77.	Wall Thickness Uneven Experimental Study On Hot Power Backward Spinning For Cast 7075 Aluminium Alloy Tube
78.	Study On The Process And Equipment Of J55 Spiral Tube Forming With Uniform Wall Thickness
79.	Numerical Simulation Study On The Influence Of Geometric Factors On Forging Internal Defects Of Forged Ingot
80.	Numerical Simulation On Push Bench Process Of CPE
<<First <Prev Next> Last>> Jump to