Vibration cutting - Globe Thesis

Keyword [Vibration cutting] Result: 61 - 80 \| Page: 4 of 6
61.	Research On High Efficiency Vibration Cutting Technology Of Workpiece Vibration
62.	Research On Optimization Technology Of Ultrasonic Cutting Tool Based On Approximate Model
63.	Study On The Performance Of Plunge Cutter On The Basis Of Length To Diameter Ratio And Shock Absorption
64.	Structural Design And Research Of Special-Shaped Ultrasonic Machining Systems
65.	The Research About The Effect Of Tool Geometry Angle And Nose Radius On Regenerative Chatter
66.	Design And Realization Of An Assisted Machining Platform For The Twin Face Lathe
67.	Study On Ultrasonic Elliptic Vibration Deep-hole Boring Technology For High-strength Steel 18Cr2Ni4WA
68.	Design On Ultrasonic Ellipse Vibration Working Head And Experiment
69.	Study On Cutting Temperature In Elliptical Vibration Cutting
70.	Research On Chatter Identification And Suppression Method Of Three-Dimensional Elliptical Vibration Cutting
71.	Study On Chip Formation And Its Effects On Cutting Process In Elliptical Vibration Cutting
72.	Study Of Two-Dimensional Vibration Cutting Through Guided Wave Transmission
73.	Design Of Two-Dimensional Ultrasonic Vibration Cutting Device With Double-Excitationbased On FEM
74.	Research On Ultrasonic Elliptical Vibration Cutting Technology For Difficult-to-machine Materials
75.	Study On Two-dimensional Elliptical Vibration-assisted Freeform Surface Diamond Turning Apparatus And Tool Path Planning
76.	Fundamental Research On Single Driven Ultrasonic Elliptical Vibration Cutting With Combined-beam Horn
77.	Mechanical Model And Load Characteristics Of The Disc-disc Cutter Of Composite Motion Broken Coal And Rock
78.	Microscopic Mechanism Study On Deformation Zone Of Vibration Cutting
79.	Study On The Torsional Vibration Cutting Micro-sound Drilling Mechanism
80.	Research On Monitoring Method For Machining Process Based On Double Constraints Of Vibration And Cutting Force
<<First <Prev Next> Last>> Jump to