The cutting tool - Globe Thesis

Keyword [The cutting tool] Result: 1 - 16 \| Page: 1 of 1
1.	New Organic Low Temperature Of The Cutting Tool Material Of Secondary Hardening Mechanism Of Cementite Precipitation Of Ultrafine Control
2.	The Technology Of The Radial Gear Shaving And The Research Of The Cutting Tool Application
3.	Expert System For Optimizing The Geometric Parameters Of The Cutting Tool Used On Special Machine Tool
4.	Research On The Cutting Tool State Monitoring
5.	The Design And Evaluation Of The Cutting Tool For Titanium Alloy Web Based On The Characteristics Of Vibration
6.	Research On The Cutting Tool Materials Of Ti(C,N)-based Cermets And The Cutting Performance
7.	Study On The Cutting-Tool Selection And Optimization Of Process Parameters For High-temperature Alloy Materials
8.	Reliability Modeling And Assessment Of The Cutting Tool For Milling Difficult-to-Machine Materials
9.	The Effects Of Different Abrasive Solid Particles To The Cutting Tool Edge Preparation
10.	The Effect Of Ultrasonic Cutting Of Honeycomb Composites On The Resonant Frequency And Amplitude Of Disc Cutter The Acoustic System
11.	The Influence Of The Forming Method Of The Cutting Tool’s Spiral Groove To The Surface’s Microstate
12.	Experimental Study On High Speed Machining Performance Of Titanium Alloy TC4
13.	Study On Electrochemical Discharge Machining Of Carbon Fiber Reinforced Composites
14.	Study On Mechanism And Experiment Of Carbide Tool Passivation Based On Erosion Wear
15.	Research On The Design And Cutting Technology Of The Cutting Tool Device For The Primary Processing Of Bamboo Strips
16.	Vibration Characteristics Of The Cutting Tool System With Weak Rigid Shim And Its Effects On Impact Damage Of The Cutting Tool
<<First <Prev Next> Last>> Jump to