Font Size: a A A
Keyword [TA15]
Result: 21 - 40 | Page: 2 of 7
21. The Study On Characteristics Of Infrared Radiation During Laser Welding Of TA15
22. Numerical Simulation Of Ta15 Alloy Forging Process
23. Of Ta15 Titanium Alloy Welded Joint Fatigue And Fracture Behavior
24. Simulation On Post-Welded Hot Sizing Of TA15 Titanium Alloy Thin-Walled Cone Piece
25. Study On Laser-TIG Hybrid Welding And Protection Process Of TA15 Titanium Alloy
26. Investigation On Corrosion Fatigue Behavior Of TA15 Alloy In 3.5%NaCl Salt Spray
27. The Organization And Performance Prediction Of TA15 Titanium Alloy Heat Spinning Based On The Plane Compression Model
28. Study On Ductile Damage Constitutive Model And Forming Limit Of TA15 Titanium Alloy Sheet At Elevated Temperatures
29. Modeling And Simulation Of Microstructure For Hot Gas Bulging Forming Of TA15 Titanium Alloy Based On Globularisation Mechanism
30. Deformation And Microstructure Evolution In Whole Process Of Radial-axial Ring Rolling Of TA15 Titanium Alloy
31. Study On Microstructure Simulation And Thermoplastic Flow Stress Of TA15
32. The Study About The Effect On Stress Distribution Of The TA15Sheet With EBW And Heat Treatment After Welding
33. Mass Transfer And Spiking Research In Deep Penetration Electron Beam Welding Of Titanium Alloy
34. Study On Cracks And Microstructure Of Weld Zone Of TA15/Cr18-Ni8Steel Joints By Filler Wire GTAW
35. Microscopic Mechanism And Crystal Plasticity Finite Element Simulation Of TA15 Titanium Alloy At Deformation Process
36. Research On High Temperature Deformation Mechanism And Heat Treatment Process Of TA15 Titanium Alloy
37. Effects Of Ultrasonic Impact Treatment(UIT) On The Distribution Of Residual Stress In TA15 Titanium Alloy Sheet
38. The Microstructure And Mechanical Properties Of Laser Melting Deposited TA15/Ti2AlNb Dual Alloys
39. Research On Microstructures And Properties Of TA15 Titanium Alloy Formed By The Technology Of Laser Rapid Forming Combined With Continuous Point Forging
40. Numerical Simulation Of The Process Of TA15 By The Point Continuously Forging And Laser Rapid Forming
  <<First  <Prev  Next>  Last>>  Jump to