Sublevel caving - Globe Thesis

Keyword [Sublevel caving] Result: 101 - 120 \| Page: 6 of 7
101.	Mining Technology Study Of Last Sublevel Auxiliary Route On Upper Orebody In Longshou Mine Second West Mining Area
102.	Study Of Dividing A Single Blast Into Two Parts Of Inclined Medium-thick Ore Body
103.	Laboratory Study On Three-dimensional Drawing Under Inclined Wall Conditions
104.	Study On The Theory And Application Of End Drawing In Sublevel Caving Without Sill Pillar
105.	Study On Economic Mining Of Pillarless Sublevel Caving Method
106.	Study On Relationship Between Particle Size Density And Mixing Rate Of Overlaying Rock Layer
107.	Research On The Structural Parameters And Multi-layer Flow Law Of The Stope Below 1300m In Jianshan Iron Mine
108.	Geomechanical assessment of dilution potential for sublevel caving at Ekati Diamond Mine: Case study and generalized approach
109.	Study On Anchorage Control Of Surrounding Rock In Gob-side Driving Of Fully Mechanized Sublevel Caving In “Three Soft” Thick Coal Seam
110.	Study On Mining Effect Laws And Around Rock Control Methods Of Fully-mechanized Sublevel Caving Face Roadways In Guobei Coal Mine
111.	Study On The Safety Mining Technology For Sublevel Caving To The Difficult-to-mine Ore Body In The Northern Mining Area Of Xishimen Iron Mine
112.	Experimental Study On Inserts Drawing
113.	Influence Of Drawpoint Sizes On Inserts Drawing Technique
114.	Monitoring And Analysis Of Stope Stability Under The Co-mining Conditions Of Dual Mining
115.	Study On The Improvement Of Blasting Effect Of First Mining Section By Non-pillar Sublevel Caving Method In A Mine
116.	Experimental Study On Pre-mixing Of Barren Rock In Face-end Ore-drawing Of High Section Non-pillar Sublevel Caving
117.	Studies On Ore-blast Of Distance And Parameter Optimization About Sublevel Caving Method In The Goldmine Of SiFang
118.	Study On Complete Disclosure And Characterization Of Ore Residue By Caving Method Based On Ore Drawing Simulation Test
119.	Study On The Movement Law Of Caving Filling Body And Its Influence On Ore Recovery
120.	Study On Failure Mechanism And Protection Measures Of Fan-Shaped Holes Brow Line Of Broken Orebody
<<First <Prev Next> Last>> Jump to