Stamping die - Globe Thesis

Keyword [Stamping die] Result: 81 - 99 \| Page: 5 of 5
81.	Microstructure And Properties Of Hot Stamping Die Steel
82.	Study On The Friction And Wear Behavior Of SDCM Hot Stamping Die With High Thermal Conductivity
83.	Research On Stamping Technology Of Leaf Spring Lifting Lugs For Three-wheeled Vehicles
84.	Research On Laser Cladding Process And Microstructure Properties Of Hot Stamping Dieface
85.	Development Of A Three-dimensional Fully Parametric Stamping Die Automatic Design System For Microwave Oven Front Plates Based On NX Platform
86.	Numerical Simulation And Parameter Optimization Of Cooling System Of 22MnB5 Ultra-high Strength Steel Hot Stamping Die
87.	Research On Cooling Water Flow Distribution Method Of Multi-cavity Hot Stamping Die
88.	Study On The Deposition And Tribological Properties Of CrXN(X=Mo,Ti) Coatings By Arc Ion Plating Technique
89.	Research And Development Of Teaching System Of 3d Stamping Die Intelligent Design Based On NX Platform
90.	Study On Laser Repair Technology Of Cold Stamping Die Edge Based On Cr12MoV
91.	Structural Strength Analysis And Optimization Of Stamping Die For Automobile Panels Based On Sheet Metal Forming Simulation
92.	Finite Element Simulation And Section Quality Optimization Of New Zirconium Alloy Sheet Blanking
93.	Research On Rapid Design System Of Cooling Channel For Hot Stamping Die Insert Based On NX
94.	Design And Research Of The Multi-Station Stamping Die For The Bending Chain Plate Of The Pin-and-Holding Chain
95.	Construction Mode And Semantic Management Of Digital Design Resources For Stamping Die
96.	Study On Wear Performance Of Stamping Die For Commutator
97.	Friction And Wear Properties Of Laser Processed Micro-textured Die Surfaces
98.	Research On Stamping Forming Parameters Optimization And Life Of Stamping Die For Outer Plate Of Rear Wheel Cover
99.	Secondary Vocational "Stamping Mold Manufacturing" Project Development And Teaching Practice Research
<<First <Prev Next> Last>> Jump to