Single-point - Globe Thesis

Keyword [Single-point] Result: 81 - 100 \| Page: 5 of 7
81.	Research On The Micro-mechanism Of Single Point Progressive Forming Plastic Deformation Of Magnesium Alloy Sheet
82.	Research On Numerical Control Single Point Progressive Forming Process Sheet Forming Limit
83.	Study On Residual Strain In Metal By Tiaht Grid Method
84.	Study On Machining Characteristics Of Single Crystal Germanium In Plastic Domain At Micro And Nano Scales
85.	Optimization Of Single-point Progressive Forming Process For Multi-pass Aluminum Alloy Sheet
86.	Parameter Identification And Vibration Analysis Of Ultra-precision Single-point Diamond Fly-cutting Machine Tool
87.	Study On The Surface Quality Analysis And Process Parameter Optimization Of KDP Crystal Single Point Diamond Cutting
88.	Theoretical And Technological Research Of SPDT Machining For Freeform Surfaces Under Precision Constraints
89.	Experimental Study On Single Point Incremental Forming Of TC4 Titanium Alloy Sheet Based On Temperature Control By Resistance Heating
90.	An Improved MST Based Key Feature Extraction Method And Its Application On Finish Rolling Temperature Modeling
91.	Research On The Application Of Three-dimensional Laser Scanning Technology In Slope Deformation Monitoring Of Goafs In Mines
92.	Molecular Dynamics Simulation Of The Surface Quality Of Metal Cerium Single-point Diamond Cutting
93.	Multi-stage A/O-MBR Process For The Removal Of Nitrogen And Phosphorus From Domestic Sewage
94.	Design, characterization and machining force model of a novel orbital micromachining technology based on single-point tool tip geometry
95.	Friction and external surface roughness in single point incremental forming: A study of surface friction, contact area and the 'orange peel' effect
96.	Design and control of a fast long range actuator for single point diamond turning
97.	Investigation of the optical effects of single point diamond machined surfaces and the applications of micro machining
98.	Single point incremental forming of aluminum sheet metal: The development of maximum forming angle forming limits, measured strains, surface roughness and dimensional accuracy
99.	Heat assisted single point forming of polymer sheets
100.	Formability in computer numerically controlled single-point incremental forming
<<First <Prev Next> Last>> Jump to