Shearing process - Globe Thesis

Keyword [Shearing process] Result: 1 - 20 \| Page: 1 of 2
1.	Cyclic Deformation Response And Fatigue Behavior Of Metastable-Î² Ti-5Al-5V-5Mo-3Cr-0.5Fe Alloy
2.	Flying Crank Shear's Design And Its Shearing Process' Simulation
3.	Simulation And Analysis Of Cutting Process Of Nickel Board
4.	Simulation And Process Optimization Of The Circular Shear
5.	Dynamic Simulation On The Shearing Process Of The Continuously Cast Slab Pendulum Shear
6.	Study On Shearing Surface Quality And Punch Wear Of Blanking Progressive Die For The Connector Termininals
7.	The Simulation Of Shearing Process And Dynamicsanalysis On Rotary Drum Flying Shear
8.	Research On The Influence Of Shear Design Parameters During Parallel Shearing Process
9.	Dynamic Feature And Shearing Process Finite Element Analysis Of Double Eccentric Shaft Rotary Flying Shear
10.	Simulation And Research On Variable Width Disk Shears Machine High Strength Steel Plate Shearing Process
11.	Continuous Shear Deformation Of Pure Copper Plate Experimental Study
12.	Mechanical Properties Analysis And Finite Element Simulation Of Double-roller Crusher Shearing Process
13.	The Simulation Of The Cutting Steel Process With Rotary Trimming Shears And The Control Of Cutting Quality
14.	Study On Shearing Process Of Electrical Silicon Steel Sheet
15.	Study On Grain Refinement Mechanism Of AZ31 Magnesium Alloy By Casting Extrusion Shearing Process
16.	Microstructure,Mechanical Properties,and Texture Evolution Of Mg-Zn-(Cu,Y)-Zr Alloy Fabricated By Hot Extrusion-Shearing Process
17.	Study On Section Characteristics Of Layered Composite Sheet Cutting
18.	Experimental And Simulation Study On Guillotine Shearing Process Of 304 Stainless Steel Sheet
19.	Research On Formability Of Medium Mn Steel And Numerical Simulation
20.	Study On Shearing Process Of Fe Based Amorphous Alloy Strip
<<First <Prev Next> Last>> Jump to