Semi-Solid - Globe Thesis

Keyword [Semi-Solid] Result: 41 - 60 \| Page: 3 of 10
41.	Study On Heating And Solidification Microstructure Of Upset AZ91D Mg Alloy In The Semi-solid State
42.	Research On Semi-solid Microstructure And Processing Parameters Of Thixomolding Injection AZ91D Magnesium Alloy
43.	Research On The Processings And Equipment Of Manufacturing Thixotropic Slurry Of The ZL112Y Aluminum Alloy
44.	Study On Technology And Device Of Continuous Electromagnetic Stirring For Making Rheologic Semi-solid Slurry Of ZL112Y Aluminum Alloy
45.	The Study Of Semi-Solid Thixo-Process Of AZ91D Magnesium Alloys
46.	Study On AZ61 Magnesium Alloy Fabricated By SIMA And Reheating Process
47.	Study On The Mould-filling Mechanism And Numerical Simulation Of Rheo-diecasting Of Semi-solid Magnesium Alloys
48.	Study On Microstructure Characteristics And Analysis Software Of Semi-solid Magnesium Alloy
49.	Study On Preparation Of AlSi7Mg Alloy Semi-solid Billets By Melt Isothermal Treatment Process
50.	Effects Of RE Oxide Addition On The Semi-solid Microstructures And Properties Of AZ91D Alloy Fabricated By Strain Induced Melt Activation (SIMA)
51.	The Research On The Second Phase Crushing Mechanics During Semi-solid Processing And The Properties Of Ferro-silicon-aluminium Alloy
52.	The Researches Of Producing Process Of Semi-solid Hypereutectic Al-Si Alloy Slurry
53.	The Research On Stability And Rheological Property Of ZL117 Alloy Semi-solid Slurry
54.	Numerical Simulation Of Semi-solid Thixo-forging For Light Alloy
55.	Fabrication And Extrusion Of Semi-solid Slurry Of Hypereutectic High Cr Cast Iron
56.	Fabrication And Extrusion Of Semi-solid Slurry Of Hypoeutectic High Chromium Cast Iron
57.	Research On The Microstructures And Mechanical Properties Of The Al-Cu Alloys Fabricated By The Solid-Liquid Mixed Casting Technology
58.	The Discussion Of Semi-solid Technology For RE Al-SI Alloy
59.	Experimental Study On Roll-casting Of AZ91D Semi-solid Magnesium Alloy Strip
60.	Development Of The Temperature Control System Of The Semi-Solid Aluminum Alloy Forming Equipment
<<First <Prev Next> Last>> Jump to