Sand-casting - Globe Thesis

Keyword [Sand-casting] Result: 41 - 60 \| Page: 3 of 4
41.	Preliminary Study On Numerical Simulation Of Gas Production And Diffusion In Core During Sand Casting
42.	Analysis For Solidification Process Of Iron Mould Coated Sand Casting And Investigation On Its Non-riser Technique
43.	Study On Residual Stress,Microstructure And Properties Of ZL205A Aluminum Alloy Cylinder By Coated Sand Casting
44.	Effect Of Casting Process On Microstructure And Properties Of Wear Resistant High Manganese Steel Hammer
45.	Development Of The General-purpose CAD System For Sand Casting Based On SINOVATION
46.	The Management Parameterization Of Green Sand Casting
47.	Numerical Simulation And Process Optimization Of Sand Casting For Dredging Pump Shell
48.	Carbon Emission Calculation And Optimization Of Sand Casting Process Based On Process Parameters
49.	Research About Effects Of Heat Treatment On Microstructures,mechanical Properties And Corrosion Properties Of Mg-3Dy-2Zn-0.5Gd-0.5Zr Casting Magnesium Alloy
50.	Study On Interficial Heat Transfer Coefficients Between Casting And Sand Mold Or Core In The Sand Casting Process
51.	Research On Sand Mould Design For 3D Printing
52.	CAX Technology For Die Of Middle Bridge Shell For Heavy Truck And Secondary Development Of Relevant NC Machining
53.	Research On Melting And Pouring Charge Plan For Single Piece And Small Batch Sand Casting Enterprise
54.	The Application Of Iron Mould Coated Sand Casting In Pump And Valve
55.	Study On Water-Based High Alumina Coating For Sand Casting
56.	Low Carbon Modeling Of Patternless Sand Casting Process And Optimization Design Of Composite Mold
57.	Study On Carbo Benefit Modeling And Parameter Optimization Of Sand Casting Process Design Feature
58.	Research On The Influence Of Vibration On The Filling Property Of Aluminum Alloy Sand Casting And The Size Of The Pouring Riser
59.	Nd:YAG laser welding of ZE41A-T5 magnesium sand casting alloy
60.	Fiber Laser Sintering/Invalidating Compound Additive Manufacturing Technology And Equipment By Using Foundry Coated Powders
<<First <Prev Next> Last>> Jump to