Font Size: a A A
Keyword [SEAM]
Result: 121 - 140 | Page: 7 of 10
121. Study On Testing By Ultrasonic Waves Of Welding Seam
122. The Prospective Reserves Inside The Belt Influenced By Faults Structure Have Been Reused With The Fully-Mechanized Caving Technique
123. Study On Numerical Simulation Of Ground Movement In Steep Coal Seam Mining
124. Study On Comprehensive Fire-Fighting Technique Against Fire In Ciyaobao No.2 Experimental Coalmine
125. Study On The Law Of The Original CO Occurrence In The Coal Seam Of Dashuitou Coal Mine
126. Research On Directional Drilling Technique Of Gas Drainage In Low Gas Permeability Coal Seam
127. Research On Auxiliary Relative Equipment And Safely Mining Technology Of Slicer Coal Face
128. Study On A New Approach Of Seam Detection Based On Vision Sensor In Automatic Welding Process
129. Research Of Stress Fields And Deformation And Breakage Characters In Coal Seam Floor Under The Contidiation Of Mining
130. Research On Mechanism Of Thick Sand Dynamic Load Transmitting In Shallow Seam
131. The Technical Study Of Mining Of Unstable Coal Seam
132. Research On Safety Effect Of Limestone Water On Mining Of Lower Seam Cluster In Liyan Coal Mine
133. Study On Movement Of Top-coal And Roof Based On The Action Of Stress Shell
134. Study On Relationship Between Support And Surrounding Rock In Longwall Top-coal Caving Mining Of Steep Seam
135. Research On Top Coal Cavibility And Control Of High Ductility Very Thick Seam In Top Coal Caving Mining
136. Study Of Mining Technology On The Complex Coal Seam In Liang Bao Si
137. Technological Study Of Resonably Determining The Upper Limits Of Mining On Shallow Embedding Coal Seam
138. The Comprehensive Optimizing Study On Combined Exploitation In The Very Close Quarters Coal Seam
139. Study On The Measurement Method Of Coal Seam Primitive Gas Content And The Influencing Factors Of Its Errors
140. Study On Gas Release Regulation And Prevention Technology For Deep Soft Seam On Up-DIP Mining With Fully Mechanized Caving Face In Nantun Mine
  <<First  <Prev  Next>  Last>>  Jump to