RECRYSTALLIZATION - Globe Thesis

Keyword [RECRYSTALLIZATION] Result: 61 - 80 \| Page: 4 of 10
61.	Dual-Scale Simulation Of Dynamic Recrystallization Behavior During Hot Compressive Deformation For Bridge Steel
62.	Microscopic-Macroscopic Multi-Parameter Coupling Model Building For Low-Alloy Steel Strip Hot Rolling Process
63.	Investigations On Microstructure & Mechanical Properties Of Typical Metals After Severe Plastic Deformation
64.	Research On Performance Of Polyamino And Polynitro Derivatives Of Pyridine And Their N-oxides And Formulations
65.	Microstructure And Properties Of Ultrafine Grain 7003 Aluminum Alloy Prepared By Side - Sided Extrusion
66.	.1500 Mpa Grade Directly Quenched Martensite Steel Control Of The Organization And Strengthen The Mechanism
67.	Thin Slab Casting And Rolling Of Low Carbon And High Niobium Steel Recrystallization And Phase Transformation,
68.	Cold Wire Drawing Deformation And Recrystallization Behaviours Of AZ31 Mg Alloy
69.	Research On Microstructure Evolution And Dynamic Recrystallization Behavior Of Titanium Alloy TB6 And TA15 During β Forging
70.	Structural Modulation And Transport Properties Of High Performance Bi-Sb-Te Polycrystalline Alloys
71.	Research On High Temperature Deformation Behaviors And Application Of Bti-62421s Alloys
72.	Study On The Recrystallization Exture And Earing Behavior Of L-MG Loy
73.	Simulation Of Microstructure Evolution During Discontinuous Hot Forging Processes Using Cellular Automaton Method
74.	Phase Field Modelling Of Texture Evolution And Its Mechanisms During Recrystallization Annealing
75.	Thermal Deformation Behaviors And Strengthening Mechanism Of The Steel Produced By Compact Strip Production (CSP)
76.	Modeling And Simulation Of Dynamic Recrystallization Behavior For Materials With Second Phase Particles Using Cellular Automata Method
77.	The Research About The Quench Induced Precipitation And Quenching Sensitivty Of Al-Zn-Mg-Cu Alloys
78.	Study Of Microstructure And Mechanical Properties Of Aluminum Sheet Used For Easy-Open-Can Prepared By High-Efficient Melt-Treatment Technology
79.	The Computer Modelling Of WL510 Steel's Microstructure Development During Heating And Hot Rolling
80.	Investigation Of Austenite Microstructure Evolution During Finish Rolling In Hot Strip Continues Rolling
<<First <Prev Next> Last>> Jump to