Punching process - Globe Thesis

Keyword [Punching process] Result: 1 - 20 \| Page: 1 of 2
1.	Research On CNC System For High Feedrate Punching Process And Two-Dimensional Optimum Layout
2.	Numerical Simulation Of Combined Extruding And Punching Process For A Thick-Plate With Tubular Bulge And Parameters Optimization
3.	Preparation And Properties Of Acetate Fiber Nonwoven Filter Material
4.	The Design And Research On Punch Mode Of The Bearing Cage Maintainer
5.	Process Analysis Of High-speed Shearing And Optimal Design Research Of Shearing Institutions Of Steel Tube
6.	Study On Deformation In Open Punching Process
7.	The Analysis Of Yarn Damage On Base Cloth In The Needle-Punching Process
8.	Development And Properties Analysis Of Goat Hair Heat Fusible Interlining
9.	The Influence Of Punching And Annealing On Microstructure And Magnetic Properties Of Electrical Steel Sheets
10.	Study On The Punching Process Of Copper Busbar And The Influence Of Blanking Clearance And Die Cutting Edge On It
11.	Experimental Research On Ultrasonic Assisted Punching With Polyurethane Die
12.	A Study On The Residual Stress Near The Cutting Edge Of Silicon Steel Based On The Nanoindentation Method And FEM
13.	Study On The Punching Process Of Laminated Copper Bus And Analysis Of Influencing Factors
14.	Research On Virtual Experimental Teaching System And Simulation Of Punching Process Based On Unity3D
15.	Preparation And Thermal Insulation Properties Of PAN Pre-oxidized Fiber Mat/SiO 2 Aerogel Composite
16.	Studying On Evolution Of Texture During Annealing And Punching Process In High Silicon Steel Thin Sheets
17.	Experimental Study On Size Effect Of Laser Shock Micro-bulging/Micro-punching Process For Copper Foil
18.	Experimental Investigation Into The Electro-pulsing Assisted Punching Process Of A 2024T4 Aluminum Alloy Sheet
19.	Study On Fabrication And Accuracy Of Special Shaped Micro Punching Parts On-machine
20.	Simulation Study On Deep Punching Process Of Large Cylindrical Forgings
<<First <Prev Next> Last>> Jump to