Plunger pump - Globe Thesis

Keyword [Plunger pump] Result: 1 - 20 \| Page: 1 of 2
1.	The Structural Optimization Of Hydraulic And Self-sealing Plunger Pump
2.	Optimization Design And Performance Simulation Of Submersible Motor Rotating Drive Piston Pumping System
3.	Research On Fault Diagnosis Method For Plunger-type Injection Pump
4.	Ground Multi-cylinder Plunger Pump Seal Since The Compensation Research
5.	The Design And Research Of3500Five-cylinder Plunger Pump’s Fluid End
6.	The Low Yield Of Non Walking Beamtype Oil Pumping System Optimization Design And Dynamic Simulation
7.	Fault Diagnosis Of Submersible Reciprocating PUMP Based On Locally Linear Embedding
8.	Theoretical And Experimental Research On Pressure Response Characteristics Of VDS Anti-deviation Integrated Block In The Deep Well
9.	The Stress Analysis And Optimization Of3Zb-265Type Plunger Pump Casing
10.	Design And Research Of Fault Diagnosis System For Electric Submersible Plunger Pump
11.	Type 400 Design Paraffin Vehicie Improvement
12.	Torsional Vibration Analysis And Optimization Of Shaft System For Fracturing Pump Truck
13.	Research On Condition Monitoring And Fault Early Warning For Oilfield Plunger Pump
14.	Design And Research Of Permanent Magnet Linear Synchronous Motor Of Plunger Pump On Oil Well
15.	Vibration Analysis And Improvement Measures Of Water Injection Pipe Network Of Piston Pump
16.	Research On Laser Cladding Wear And Corrosion Resistance Layers On Working Surface Of Plunger Pump Piston
17.	Design Of The Base And Subsystem For 600 HP Plunger Pump Equipment
18.	Graded Pressure Characteristics And Experimental Study Of Multistage Soft Plunger For Pump
19.	Research On Method Of Dynamic Analysis Of Multi-opposed-plunger Pump And Its Application
20.	Study On Performance Optimization Method Of Large Flow And High Pressure Multi-Opposed Plunger Pump
<<First <Prev Next> Last>> Jump to