Font Size: a A A
Keyword [Peening]
Result: 1 - 20 | Page: 1 of 10
1. Fundamental Study On The Hot Working And Heat Treatment Technology Of GH169 And GH696 Superalloys
2. Accelerating Formation Of Nanocrystallite Al-coatings By Ball Peening Process
3. Research On Some Aspects Of Welded Joints Properties Improvement Method Of Ultrasonic Peening Treatment
4. Research On Stress Relief Mechanism By Peening Roll After Surfacing Welding And Welding With Trailing Peening System
5. Study On Shot Peening Of TiB2/Al Composite And Its Characterization
6. Recrystallization Behavior Of A Directionally Solidified Co-base Superalloy DZ40M
7. Effect Of Shot Peening And Rare Earth Oxide Coating On The Oxidation Resistance Of Fe-Cr Alloys
8. Study Of High Cycle Fatigue Behavior And Shot Peening Strengthening Of Zk60 And Gw103k Magnesium Alloys
9. Effect Of Surface Nanocrystallization On Fatigue Property Of Commercially Pure Titanium And Titanium Alloys
10. Investigation On Two Nanocrystallization Methods On Metallic Surfaces And Characterization And Properties Of Obtained Layers
11. The Study Of Surface Nanocrystallization Of Metallic Materials By High-energy Peening
12. Study On Apparent Fatigue Limit Of Shot Peened Specimens And Optimization Of Shot Peening Technology
13. A Study On Effects Of Shot-peening On Stress Corrosion Cracking In Stainless Steel Welded Joints
14. Surface Nanocrystallization Of Commercially Pure Ti And The Thermal Stability Of Microstructures Of Surface Layers
15. Surface Nanocrystallization By Shot Peening In Commercial Shotblasting Machine
16. Numerical Simulation Of Welding Residual Stress Relieving By Hammer Peening
17. The Research On Peening Method During Laser Shock Forming
18. The Oxidation Resistance Of Surface Nanostructures In 1Cr17 Stainless Steel At High Temperature
19. Surface Nanocrystallization Of Hadfield Steel Induced By Strain And Effects Of Abrasive Wear Properties
20. Surface Nanocrystallization Of Titanium And Titanium Alloy And The Texture Properties Of Their Surface Layers
  <<First  <Prev  Next>  Last>>  Jump to