Font Size: a A A
Keyword [PERFORMANCE]
Result: 121 - 140 | Page: 7 of 10
121. Ozone Induced Reactions Adopted For Making High Performance Polymers From Commodity Polymers
122. Development Of High-Performance Si3N4/TiC Nanocomposite Ceramic Tool Materials And Investigation Of Their Properties
123. Study On Compositions And Low-temperature Discharge Behavior Of Nd-free AB5 Type Hydrogen Storage Alloy
124. Study On The New Dual-Crosslinked Water Shutoff Agent In Fractured Low-Permeability Reservoir
125. Research On The Ti(C,N)-based Cermets Of High Performance And Cutting Properties Of Cermets Cutters
126. Research On Hydrogen Storage Characteristics And Phase Composition Of TiCr Based Alloys
127. Synthesis And MIS Development Of High Performance Novolac Resins For The Shell Process
128. Basic Research On Synthesis And Application Performance Of Micro-crystal Of Mg-Al Layered Double Hydroxides
129. Injection Molding Of High Performance Anisotropic Nd-Fe-B Bonded Magnet
130. The Study On Synthesis And Luminescence Performance Of Meso-Arylpyrazolylporphyrin
131. The Study Of Hydromechanics Performance Of The Countercurrent Flow Of Gas And Liquid In The Lower Blast Furnace
132. Research On Vacuum Plate Glass's Performance Of Heat Transfer And Its Stress Caused By Supporting
133. High Performance High Density Polyethylene Based Materials Prepared Through Stress-Induced Reactions
134. Prediction Of Lifetime Service Performance Of Polypropylene Geotextiles
135. Study On The Durability And Stability Of Flexible High Performance Fibers In Thermal And Light Radiation
136. Study On The Preparation And Properties Of Antibacterial Chitosan Derivatives/Lyocell Fibers
137. Study On A Novel Separation And Enrichment Technique Using Liquid Membrane Coupled With High Performance Liquid Chromatography Analysis
138. Study On Olivine-type LiFePO4/C Composite Cathodic Materials
139. Study On The Fabrication And Cutting Performance Of Ceramic Tool Materials Based On Multi-phase And Multi-scale Nanocomposites
140. Study On Development And Cutting Performance Of High Mechanical Property Cermet Tool Materials
  <<First  <Prev  Next>  Last>>  Jump to