Font Size: a A A
Keyword [Nickel-Chromium]
Result: 21 - 40 | Page: 2 of 3
21. Preparation Process And Properties Of Ni-Cr-Co Alloy High Temperature Wear Resistant Coatings
22. Screening Of A Copper-nickel-chromium Tolerant Bacterial Strain And Analysis Of Its Removal Efficiency Against Electroplating Wastewater
23. Study On The Emissivity Of Spring Steel,Brass And Nickel-chromium Alloy
24. Research On Electrical Properties And Process Parameters Of Alloy Film Resistance Strain Sensor
25. First-principles Study Of FeNi1-xCrx(0?x?1) Disordered Alloys From Special Quasirandom Structures
26. Preparation And Influencing Factors Of Electroless Nickel-Chromium-Phosphorus Alloy Coatings
27. Oxidation behavior of nanostructured cobalt nickel chromium aluminum yttrium and nickel cobalt chromium aluminum yttrium sprayed by HVOF
28. Oxidation of single and dual phase nickel chromium aluminum (yttrium) bond coat alloys
29. The effect of alloy composition on the localized corrosion behavior of nickel-chromium-molybdenum alloys
30. Development, processing and fabrication of a nickel based nickel-chromium-iron alloy
31. Development of new electrochemical techniques to detect the depletion of alloying elements in nickel-chromium-molybdenum-tungsten alloys
32. Linear multicomponent diffusion in the gamma phase in the nickel-chromium-molybdenum system
33. Thermodynamic modeling and experimental analysis of oxidation/sulfidation of nickel-chromium-aluminum model alloy coatings
34. Hardness characteristics of cobalt/chromium and nickel/chromium by electrodeposition or electroless deposition
35. Intergranular stress corrosion cracking and selective internal oxidation of nickel-chromium-iron alloys in hydrogenated steam
36. Exploring De-alloying in Iron-Nickel-Chromium Alloys and its Relationship to Stress Corrosion Cracking in Nuclear High Temperature Water Environments
37. Grain boundary deformation-induced integranular stress corrosion cracking of nickel-chromium(16)-iron(9) in 360 degrees Celsius water
38. Isotope ratio mass spectrometry of iron, nickel, chromium and palladium using their volatile phosphorus trifluoride complexes: Application of a microscale cocondensation method to sample preparation
39. The effect of environment on the creep deformation of ultra-high purity nickel-chromium-iron alloys at 360 degrees Celcius
40. Metallurgical evaluation of heat -treated nickel -chromium base denture alloy
  <<First  <Prev  Next>  Last>>  Jump to