Mold casting - Globe Thesis

Keyword [Mold casting] Result: 41 - 60 \| Page: 3 of 3
41.	Research On The Influence Of Vibration On The Filling Property Of Aluminum Alloy Sand Casting And The Size Of The Pouring Riser
42.	Application of heat pipe technology in permanent mold casting of nonferrous alloys
43.	Numerical simulation of filling and solidification of permanent mold castings
44.	A study of interfacial heat transfer and process parameters in squeeze casting and low pressure permanent mold casting
45.	Submerged mold casting using heat pipes
46.	FUNDAMENTAL CHARACTERISTICS OF METAL FLOW IN THE FULL-MOLD CASTING OF ALUMINUM ALLOYS (LOST-FOAM; POLYSTYRENE)
47.	Microstructure And Properties Of High Strength And Toughness Al-Si-Cu-Ni-Mg Hypereutectic Al-Si Alloy
48.	Microstructure And Deformation Mechanism Of Mg-Zn-Y-Nd Alloy Prepared By Step-Copper Mold Casting
49.	Effect Of Cold Materials On Microstructure And Properties Of 2a12 Aluminum Alloy Ingots In Mold Casting
50.	Influence Of Trace Yttrium On The Structure And Properties Of A356 Prepared By Metal Mold Casting And T6 Treatment
51.	Study On The Quick Water Cooling Design Method Of Permanent Mold Casting
52.	Study On Application Of 3D Printing Pattern In Plaster Mold Precision Casting
53.	Numerical Simulation Of Solidification And Rolling Process Of The Steel Ingot And Its Design Optimization
54.	Research On Monitoring And Tracking System Of Lost Mold Casting Process And Workpiece
55.	Study On The Divorced Growth Behavior Of Eutectic Solidification In Hypereutectic Al-Si Alloys
56.	Process Simulation And Process Optimization Of ZL205A Large Metal Mold Casting
57.	Research On Shell Mold Casting Process Optimization Of Nodular Cast Iron In Screw Pump
58.	Machined Graphite Mold Casting And Its Numerical Simulation Of Titanium Alloy Casing For Centrifugal Pump
59.	Effect Of Grain Refinement On Microstructure And Properties Of Sand Mold Casting Al-Si Alloys
60.	Application Of Electro-hydraulic Proportion Control In Anode Vertical Mold Casting System System
<<First <Prev Next> Last>> Jump to