Font Size:
a
A
A
Keyword [Mold casting]
Result: 21 - 40 | Page: 2 of 3
21.
The Inverse Analysis Of Interface Heat Transfer Coefficient At The Metal/Mold In Water-cooled Mould Casting
22.
Research On Pore Structure And Mechanical Properties Of Directionally Solidified Porous Aluminum Alloys Prepared By Mold Casting Technique
23.
Research On The Microstructure And Properties Of Rapidly Solidified And Horizontal Continuous Casted Cu-Zr-Al Alloys
24.
Study On Interface Heat Transfer Coefficient During Solidification Of Metal Mold Casting
25.
Design And Production Validation Of 1-Mold-2-Casting Of Aluminum Cylinder Head By Low Pressure
26.
Research On ZL104 Organization And Performance Of Full Mold Casting
27.
Microstructure And Mechanical Properties Of Heat Resistant Mg-Al-La Alloys
28.
Effects Of Micro Tion Microstructure And Properties Of Zr-based Amorphous Alloy
29.
Research On The Composition Segregation Of Cu-15Ni-8Sn Alloy In Permanent Mold And Sand Mold Casting Ingots
30.
Solidification Of 60t Flat Steel Ingot?simulation Of Stress Behavior And Production Practice
31.
Study On Formation Mechanism Of Initial Defects In Continuous Casting Slab Based On Analysis Of Mechanical Behavior
32.
Research On Automatic Ingot Casting Car And Its Automatic Control Technology
33.
Research On The Qualification Ratio Improvement Of Gypsum Mold Casting In Huahong Company
34.
Study On The Casting Technology Of Flexible Metal Mold And Its Solidification Microstructure And Properties
35.
Design And Characterization Of High Strength And Corrosion Resistant Casting Aluminum Alloys
36.
Study On Casting Method And Interface Behavior Of Continuous Carbon Fiber Reinforced Ductile Iron Crankshaft
37.
S44SY Crankshaft Steel Inclusion Research And Process Optimization
38.
Effect Of Cooling Rate On Microstructure Of Mg-Gd-Y-Zr Alloy In Permanent Mold Casting
39.
Study On Filling Process In Aluminum Alloy Full Mold Casting
40.
Study On Rare Earth Strengthening Of Aluminum Alloy Based On Permanent Mold Casting
<<First
<Prev
Next>
Last>>
Jump to
