Microstructure and texture - Globe Thesis

Keyword [Microstructure and texture] Result: 21 - 40 \| Page: 2 of 6
21.	Effect Of Microstructure And Texture On The Formability And Serrated Deformation Behavior Of5xxx Series Aluminum Alloy
22.	Formation Mechanisms And Control Methods Of Recrystallization Microstructure And Texture Of Fe-6.5Si Electrical Steel Sheets
23.	Effect Of Electrical Current Pulses On Microstructure And Texture Evolution In A Cu-Zn Alloy
24.	Influence Of Annealing And Dynamic Plastic Deformation On The Microstructure And Texture Of Pure Magnesium
25.	The Influence Of Annealing On The Microstructure And Texture Of Cold Rolled AZ31Magnesium Alloy Sheet
26.	The Evolution Of Microstructure And Texture Of Zr-Sn-Nb Sheet Druing Processing And Investigatation Of Deformation Mechanism Of Zr-Sn-Nb Sheet During Cold Rolling
27.	Study On Microstructure And Texture Of The Domestic New Zirconium Alloys Tube During Cold Rolling
28.	Research On The Microstructure And Texture Of High Voltage Anode Aluminum Foil During Rollinga Nd Annealing Treatment
29.	Evolution On The Microstructure And Texture Of The3%Si Non-oriented Silicon Steels Prepared By Twin-Roll Casting Process
30.	Effect Of Normalizing Temperature On Microstructure And Texture Evolution Regularity Of Non-oriented Electrical Steel
31.	Evolution Of Microstructure And Texture During Recrystallization Process In Rolled Wrought Mgal Based Alloys
32.	Evolution Of Microstructure And Texture Of High Purity Titanium Under Different Strain Rate
33.	Microstructure And Texture Of Niobium Plates/Foils Fabricated By Different Rolling Methods
34.	Microstructure And Texture Evolution Of Cold-rolled High-manganese Austenitic Steels
35.	Effect Of Pulsed Magnetic Field On Microstructure And Texture Of Grain-oriented Silicon Steel During Primary Recrystallization Process
36.	Research On Influence Of Initial Microstructure And Deformation Conditions On Microstructure And Texture Evolution Of Hot-Extruded AZ31Magnesium Alloy
37.	Study Of Microstructure And Texture Of Aluminum Alloy By Rolling And Multiple Constrain Deformation
38.	Study On The Microstructure And Texture Of The 6016 Aluminum Alloy Body Sheet During The Processing Procedures
39.	Study On Hot Rolling Simulation And Microstructure Of 20 Steel
40.	Study On The Effects Of Micro-alloying Element Sn On Microstructure And Texture Development Of Ferritic Stainless Steel
<<First <Prev Next> Last>> Jump to