Micromachining - Globe Thesis

Keyword [Micromachining] Result: 1 - 20 \| Page: 1 of 8
1.	Researches On Electrochemical Micromachining
2.	The Investigation On The Electrochemical Micromachining (ECMM) With Nanosecond-Pulse Current
3.	Study On Complex 3-Dimensional Microstructure Machining On Metal Surface By Confined Etchant Layer Technique
4.	Research On Key Techniques Of Pulses Electrochemical Micromachining
5.	Study On Micromachining Techniques For Three-Dimensional Microstructures Based On Controlled Scratching By AFM Tip
6.	Research On Key Technologies Of Micromachine For Electrochemical Micromachining (ECMM) With Nanosecond Pulse Voltage
7.	Mechanisms Of The Tiny-grinding Wheel Finishing Based On The Electro-magneto-rheological (EMR) Synergistic Effect
8.	Fundamental Research On Electrochemical Micromachining Of Surface Texture And Applications
9.	Micromachining Of Hard Brittle Insulating Materials Based On Electrochemical Discharge Effect
10.	Study On Fluorescence Emission Of Silicon Induced By Nanosecond Pulse Laser
11.	Research On Laser Micromachining Of Pmma-Based Microfluidic Chip
12.	Simulation Of Silicon Anisotropic Etching Using Cellular Automata Method
13.	Studying On The Machining Technology Of 3D Electrochemical Micromaching
14.	Characteristics Of Excimer Laser Micromachining During Mask Projection Etching And Pattern Scanning Etching
15.	Design Of Electrochemical Micromaching Setup And Related Experiments
16.	Localization Of Electrochemical Micromachining And Electroforming With Nanosecond Pulse Duration
17.	Studies On Theories And Experiments In Femtosecond Laser Ablation Of Metal
18.	Research On Wet Anisotropic Etching Of Silicon In MEMS
19.	Research On Fine Machining Using Instantaneous Tiny Grinding Wheel Based On ER Effect And Design Of ER And MR Fluid-assisted Ultra-precision Polishing Installation
20.	Numerical Simulation And Experiment Study On The Surface Micro-texturing With Laser Pulse
<<First <Prev Next> Last>> Jump to