Font Size:
a
A
A
Keyword [Metal mold]
Result: 21 - 32 | Page: 2 of 2
21.
Study And Application Of Interfacial Heat Transfer Between Metal Melt And Substrate
22.
Foundry Process Design And Optimization Of Valve Body Series Of Pneumatic Components
23.
Metal Mold Design Of Tensile Specimen An RE Strengthening Of Aluminum Alloy
24.
Study On Rare Earth Strengthening Of Aluminum Alloy Based On Permanent Mold Casting
25.
Accounting for transient temperature measurement error with a high fidelity thermocouple model and application to metal/mold interfacial heat flux estimation
26.
Heat transfer at the casting metal-mold interface during solidification
27.
FUNDAMENTAL CHARACTERISTICS OF METAL FLOW IN THE FULL-MOLD CASTING OF ALUMINUM ALLOYS (LOST-FOAM; POLYSTYRENE)
28.
METAL-MOLD INTERFACIAL HEAT TRANSFER DURING THE SOLIDIFICATION OF METAL CASTINGS
29.
Influence Of Trace Yttrium On The Structure And Properties Of A356 Prepared By Metal Mold Casting And T6 Treatment
30.
Study On The Divorced Growth Behavior Of Eutectic Solidification In Hypereutectic Al-Si Alloys
31.
Process Simulation And Process Optimization Of ZL205A Large Metal Mold Casting
32.
Effect Of Heat Treatment And Composite Coatings On The Properties Of The In-mold Oxidation Layer Of Cast Aluminum Alloy
<<First
<Prev
Next>
Last>>
Jump to
