Mechanical coupling - Globe Thesis

Keyword [Mechanical coupling] Result: 161 - 180 \| Page: 9 of 10
161.	Numerical Calculation Of Temperature Field And Thermal-mechanical Coupling For The Permafrost Around The Buried Gas-pipeline In High-elevation Permafrost Regions
162.	Testing Experiments And ANSYS Simulation For Underground Pipelines Based On Non-contact Magnetic Memory Effect
163.	Three-scale Asymptotic Analysis Of Coupling Thermoelastic Problem In Small Periodic Structure
164.	Tests On Hydro-mechanical Coupling Characteristics Of Fractured Limestone In Complete Stress-strain Process
165.	Numerical Simulation And Experimental Study Of U Type Hot Stamping Forming Workpiece
166.	Thermo-fluid-mechanical Coupling Analysis On The Damage Evolution Of Coal And Rock And The Gas Seepage
167.	Numerical Simulation And Study On Gas Drainage From Boreholes In Xie-yi Coal Mine Under Upper Protective Layer Mining
168.	Numerical Simulation Analysis Of Bucket-shape Part Prepared By Friction Stir Backward Extrusion
169.	Geometric Accuracy Analysis And Key Parts Improvement On Horizontal Turn-milling Center
170.	Reseaech On High Temperature Cut-off Butterfly Valve Used In Catalytic Hood
171.	Electromechanical Coupling Vibration Analysis And Control Research Of The Main Drive System Of Cold Rolling Mill
172.	Theoretical Investigation And Thermo-mechanical Coupling Simulation Of Magnesium Alloys During Stamping Forming
173.	Research On Structural Design And Properties Of Three-dimensional Braided Piezoelectric Composites
174.	Study On The Interface Bonding Strength And Damping Capacity Of NiTi/Al Multilayer Composites By Ultrasonic Additive Manufacturing Method
175.	Preparation Of Carbon Nanotube/Water-based Epoxy Shape Memory Composite And Its Thermo-mechanical Coupling Behavior Under Thermal Shock
176.	Numerical Simulation And Optimization Of The Convection Heat Transfer In The Main Shaft Box Of Straight Wire-Drawing Machine
177.	Topology Optimization Design Of Cooling System For Hot Stamping Mold
178.	Study On The Formability Of HSS Steel In Cold Stamping Based On Thermal-Mechanical Coupling And Variable Friction Coeffcient
179.	Structural Mechanics Analysis And Research On The Top Plate Of Tire Mold
180.	Study On Flow Characteristic Evolution Of Single Crack In Lignite Under Thermo-mechanical Coupling
<<First <Prev Next> Last>> Jump to