Mechanical coupling - Globe Thesis

Keyword [Mechanical coupling] Result: 101 - 120 \| Page: 6 of 10
101.	Finite Element Modeling Andanalysis Thermal-mechanical Coupling Of High-speed Cutting Nickel-based Alloys
102.	The Influence Of Complicated Groove On Residual Stress Of Machined Surface In Turing Process
103.	The Analysis Of The Thermo-mechanical Coupling Properties For Fibre Metal Laminate Composites Lattice Structure
104.	Control Of Grinding Surface Residual Stress And Experimental Research Of Parts’ Surface Integrity
105.	Research On Hardening Mechanism Of Grinding Part Surface Affected Layer In Small Cutting Depth
106.	Physical Simulation And Analysis Of NC Milling Thermal-mechanical Coupling
107.	The Research On The Key Technologies Of Cladding Strip Continuous Casting Process Using A Twin Roll Caster
108.	Research On Thermo-mechanical Coupling Of Gear Form Grinding Interface
109.	Drying Tobacco Mechanical Properties Analysis
110.	Thermal Insulation Aluminum Honeycomb Panels And Numerical Simulation Study Of Thermal Coupling
111.	Study On Mechanical Coupling Effect Caused By Carbon Nanotubes Reversed
112.	Study On The Mechanical Characteristics Of Coal-rock Mass Of Coalfield Fires With Thermo-hydro-mechanical Coupling For Fissure Seepage
113.	Hydro-Mechanical Modeling Of Fracturing Evolution In Rocks And Mechanism Of Water-Inrush From Coal Seam Floor
114.	Research On Fully-Wrapped Carbon Fiber Reinforced Composite High-Pressure Hydrogen Storage Cylinder Subjected To Localized Fire
115.	Preparation And Electro-mechanical Coupling Modeling For Ionic Polymer Metal Composite (IPMC)
116.	Study On Thermal-mechanical Coupling Dynamic Modeling, Analysis And Optimization Methods For The Feed System Of Gantry Machine Tool
117.	Study On Characteristics Of Che Mo-mechanical Coupling Of Coal Shale And Its Borehole Stability
118.	Large-size Thread Whirling Numerical Simulation And Optimization Of Milling Parameters
119.	Research On Thermo-Mechanical Coupling And Error Compensation For RAM Components Of NC Milling-Boring Machine Tool With Adjustable Stand
120.	Influence Of Pre-stress On Workpiece Surface Residual Stress Of Grinding Hardening
<<First <Prev Next> Last>> Jump to