Font Size: a A A
Keyword [Mathematical modeling]
Result: 101 - 120 | Page: 6 of 10
101. The Mathematical Modeling And Optimal Design Of A SCR Denox System For A 300MW Pulverized Coal Fired Boiler
102. The Dynamical Analysis For The Resistance Of Bacteria With Resistant Plasmids
103. Mathematical Model Of Galvanizing Line Furnace Seam Tracking
104. A Simulation And Verification Of Experiment Study Of The Surface Roughness For The External Surface Of Pipe With Translational CNC Milling
105. The Research On Geometric Features Mathematical Modeling And 3D Tolerance Analysis Method Based On GPS
106. Denitrogen Efficiency And Mathematical Modeling Of Dynamic Membrane Bioreactor (DMBR)
107. The Layered Plastic Response And Mechanism For Multi-touch Load Of 45 Steel
108. Mathematical Simulation Of High-Pressure Ethylene Polymerization Process In Tubular Reactor
109. Research On Numerical Analysis Method For Color Matching In Textile Dyeing Based On Least Square Fitting
110. The Effect And Influence Factors Of Novel Loop Membrane Bioreactor For Treating The Cephalosporin Intermediate Wastewater
111. Research On Process Optimization Of Turbulence Pickling By Hydrochloric Acid Based On Frequency Conversion Technology
112. The Design On Kinematic Structure & Control System Of The New Plate Bending Machine
113. Studies On Optimization Of Drying Technology, Mathematical Modeling And Quality Changes Of Traditional Cooked Sweet Potatoes During Hot-air Drying
114. Numerical Simulation And Optimization Of Biological NutrientRemoval In MSBR Process
115. Performance And Mathematical Modeling Of Microaerobic Simultaneous Desulfurization And Denitrification Process
116. Fluid Flow Phenomena And Transition Of Inclusions During RH Refining Process
117. Accumulative Total Macro Plastic Deformation Research Under Low Stress Repeated Impact Based On The Finite Element
118. Study And Design For A United Protection System Of Coating And Electrochemical Protection With Carbon Fiber Anode Embedded In Coating
119. The Study Of The Visualized System Numerical Control CNC Of Cutting Saw Blanking And Sawing Process
120. The Research Of Hydraulic And Control Technology Of Die Casting Under Constant Flow Rate Dumping Pouring
  <<First  <Prev  Next>  Last>>  Jump to