Font Size: a A A
Keyword [Layup]
Result: 1 - 19 | Page: 1 of 1
1. Experimental And Simulation Study On Vacuum Assisted Resin Infusion Process
2. The Method Of Analysis For Vacuum-assisted Wet-layup Flush Repaired Composite Laminates
3. The Simulation Of The Composite Laminates Damage Patch-bonded Repair
4. Assembly Deviation Analysis Considering Composite Flexible Part's Fiber-layup-angle Error
5. Optimization Method Of Fiber Trajectory Based On Gap Defect And Layup Pressure Analysis
6. Optimized Design Of Composite Drive Shaft Layup
7. Performance Analysis Of Layup-oriented Non-continuous Prepreg Composites
8. Preparation And Properties Of Novel B4C/CF/PI/AA6061 Hybrid Composite Laminates For Spent Fuel Storage
9. Structure Optimization Of Fiber Reinforced Composites Based On MMC Method
10. Development of Vacuum Assisted Resin Transfer Molding (VARTM) method for the repair and strengthening of concrete structures
11. An automated fabric layup machine for the manufacturing of fiber reinforced polymer composite
12. Measurement, analysis and process planning for the layup of unidirectional fabrics
13. A methodology for the automation of dry fabric layup for fiber reinforced polymer composite manufacturing
14. Development of a design tool to assist layout/layup design to minimize warpage of a PWB during fabrication and reflow solder processes
15. The effect of layup and pressure on mechanical properties of fiberglass and kenaf fiber composites
16. Ultrasonic Consolidation of Thermoplastic Composite Prepreg for Automated Tape Layup
17. Research On Low-velocity Impact And Post-impact Compression Properties Of Stitched Carbon Fiber Foam Sandwich Composites
18. Investigations Of Micro-Structures And Mechanical Behaviors Of Biological Corner Material
19. Automated Layup Of Woven Composite On Nondevelopable Surface Based On Imitation Learning
  <<First  <Prev  Next>  Last>>  Jump to