Internal combustion engine - Globe Thesis

Keyword [Internal combustion engine] Result: 1 - 20 \| Page: 1 of 2
1.	Multi Fuel, Multi-level Environmental Development Of The Internal Combustion Engine Oil
2.	A Preliminary Study On The Improvment Of Nanofluids To The Lubrication And Friction Of Sliding-contact Component System
3.	Research Of NC Machining Process For Cylinder Cover Of Locomotive Internal Combustion Engine
4.	The Deacidification And Oxidation Stability Study On Regenerating The Waste Internal Combustion Engine Oil To The Base Oil
5.	Study Of The Internal Combustion Engine Aluminum Piston Ring Groove Machining Tool
6.	Deterioration Of The Internal Combustion Engine Oil Flocculation - Clay Composite Renewable Technology Research
7.	Numerical Analysis And Interfacial Performance Improvement Of YSZ Thermal Barrier Coatings On Low Heat Rejection Internal Combustion Engine
8.	Study On The Preparation Of The Iron-base Coating Of Aluminum Internal Combustion Engine Cylinder Wall And The Tribological Properties
9.	The Basic Experimental Research On The Improvement Of Nano-fluids To The Lubrication And Friction Of Internal Combustion Engine
10.	Study On Wear Resistance Mechanism Of Fe Based Coating On Inner Wall Of Internal Combustion Engine Cylinder
11.	Study On Transient Micro-combustion Characteristics Of Alcohol Ether Fuel In Mesoscale Reciprocating-piston Internal Combustion Engine
12.	Microstructure Properties And Oxidation Resistance Research Of A Nickel-based Superalloy For Internal Combustion Engine Exhaust Valve
13.	Numerical Study Of Reactivity Controlled Compression Ignition (RCCI) Using Different Combinations Of Multi-component Surrogates For Diesel And Gasoline
14.	Al5Ti1B Refiner Effect For The Microstructrue And Propertirs Of AL-SI Alloy Piston Of Internal Combustion Engine
15.	Thermal Performance Analysis Of Fuel Cell Internal Combustion Engine Hybrid System
16.	Numerical Study On Pressure Drop And Regeneration Characteristics Of The Novel Asymmetric Channel Particulate Filter
17.	Technical Research And Equipment Development For Crankshaft Fillet Impact Strengthening Of Internal Combustion Engine
18.	Performance Study On Free Piston Linear Generator In ORC Waste Heat Recovery System For Vehicle Internal Combustion Engine
19.	Analysis Of Shaft Work Heat Conversion And Utilization Unit Of Internal Combustion Engine Heated Steam Generator
20.	Research On The Capacity Optimal Configuration And Operation Of CCHP Microgrid With Coalbed Methane Internal Combustion Engine
<<First <Prev Next> Last>> Jump to