Font Size: a A A
Keyword [Instantaneous]
Result: 141 - 160 | Page: 8 of 9
141. Mechanical Model And Experimental Verfication Of NMQL Milling Of Aeronautical Aluminum Alloy
142. Dynamic Characteristics Identification Method Of Main Cutting Force Energy Consumption Of High Energy Efficiency Milling Cutter Under Vibration
143. Instantaneous Rotational Speed Measurement Of Rotating Machinery Through Image Processing
144. Evolution And Process Planning Method Of Instantaneous Friction Energy Consumption On Flank Face Of High Energy Efficiency Milling Cutter
145. Class-Ⅰ Size Synthesis And Software Development Of Floating Roller/flat Pushrod-disc Cam Linkage Mechanism
146. Study On Wood Damage Identification Based On Acoustic Emission Technology
147. Research Of Low NO_x Combustion Based On The Flue Gas Recirculation For Direct Vented Domestic Gas Water Heater
148. Dynamic Safety Management Of Scenic Spots Based On Instantaneous Population Estimation
149. Spatial And Temporal Distribution Of INDOOR PM2.5 Based On Short-term Exposure Of Indoor Pollution Sources
150. Development And Application Of Early Warning And Source Identification System For River Chemical Spill Incidents
151. Preparation Of Crimped Graphene And Its Performance As Anode Material For Lithium Ion Batteries
152. Research On Dehydration And Quality Improvement Of Low-rank Coal Based On Instantaneous Release Of High Pressure Steam
153. Research On Process And Performance Of Non-cyanide Silver Plating With DMH And NA As Coordinators
154. Formability And Microstructure Evolution Of 7075 Aluminum Alloy Under Instantaneous Current And Electromagnetic Force
155. Quantification Of Pollutant Emissions From Non-road Construction Machinery Based-on Real-world Measurement
156. Preparation Of Graphene-like Carbon Microspheres And Their Lithium Storage Properties
157. Study On The Ptlp Diffusion Bonding Process Of Si3N4 Ceramic/Ht250 Cast Iron
158. Flow Field Characterization And Regulation Method Based On Streamline Simulation
159. Design Of Semi-Direct Drive Switched Reluctance Motor Drive System For Pumping Unit
160. Profile Construction And Instantaneous Milling Force Model Of Forming Milling Tool For Large Wind Power Transmission Gear
  <<First  <Prev  Next>  Last>>  Jump to