Hot-forming - Globe Thesis

Keyword [Hot-forming] Result: 121 - 140 \| Page: 7 of 8
121.	ORIENTATION OF CERAMIC MICROSTRUCTURES BY HOT-FORMING METHODS
122.	Hot Forming Properties And Hot Stamping Process Of Docol 1500 Bor Steel For Automobile
123.	Study On Hot Stamping Deformation Behavior And Evolution Of Microstructure And Mechanical Properties Of 7075 Aluminum Alloy Body Components
124.	Studies On Microstructure,Mechanical Properties And Weldability Of Medium-Mn Automotive Steels For Hot Stamping
125.	Weldability Of The Advanced Hot Forming Steel With Large Product Of Strength And Elongation And Its Expulsion Mechanism
126.	Study On Hot Forming,Microstructure And Properties Of 5vol.%TiC_p/near ? Ti Composite Component
127.	Image Based Approximate Bayesian Reverse Method And Its Application In Fiber Metal Laminate Forming
128.	Hot Forming-Quenching Integrated Process Of 2195 Aluminum-Lithium Alloy Large-Size Thin-Walled Curved Component
129.	Experimental And Finite Element Simulation Study Of Friction Behavior Of 7075 Aluminum Alloy Hot Forming
130.	Study On Hot Deformation Behavior Of Al-Si Coating 22MnB5 High Strength Steel And Hot Forming Of Automobile B-Pillar
131.	Research On Hot Forming Property Of Al-2.2Mg-8.3Zn-3.3Cu High Strength Aluminum Alloy
132.	Friction Coefficient Determination Of The TC4 Titanium Alloy During Hot Forming By Ring Upsetting
133.	Study On Hot Forming Properties Of 7A04 High Strength Aluminum Alloy Sheet
134.	Numerical Simulation And Process Optimization Of Single Point Positive Incremental Forming Of Magnesium Alloy
135.	Effect Of Composition And Hot Forming Process On Microstructure And Properties Of Hot Forming Steel
136.	Study On Optimization Of The Heating Parameters Of Austenization And Mechanical Property Heterogeneity For Hot Forming Steel
137.	An Investigation On Microstructure And Properties Of Hot Forming And Heat Treatment Of Automobile Spring Steels
138.	Numerical Simulation And Parameter Optimization Of Cooling System Of 22MnB5 Ultra-high Strength Steel Hot Stamping Die
139.	Research On Single-Point Incremental Hot Forming Limit Of AZ31B Magnesium Alloy Sheet
140.	Temperature Control System And Thermoforming Process Optimization Of Blister Hot Forming
<<First <Prev Next> Last>> Jump to