Font Size:
a
A
A
Keyword [Horn]
Result: 1 - 20 | Page: 1 of 6
1.
Study On The Principle And Relevant Technology Of Ultrasonic Milling
2.
The Ultrasonic Treatment Of Al Alloy Melts And The Preparation Of Surface Composites By Ultrasonic Method
3.
Development Of A Rotary Ultrasonic Machine And Experimental Study Of Machining On The Machine
4.
The Research Of A Rotary Ultrasonic Vibration System Design And Its Key Techniques
5.
The Dynamic Analysis And Design Of Horns Used In Ultrasonic Machining Based On Finite Element Method
6.
The Basic Experimental Study On Micro Ultrasonic Machining For Micro Instruments
7.
The Study Of Basic Theory For Ultrasonic Parallel Shaft Gear Honing
8.
The Vibration Characteristics And Structural Design Of Transmission System In Ultrasonic Gear Honing
9.
Technological Optinization For Pelagic Ship Rudder Horn And Research Of Riser Covering Flux
10.
The Design Theory And Vibration Experiment Research Of Ultrasonic-Based Gear-Honing Device
11.
Mechanism Analysis Of Ultrasonic Machining Based On LS-DYNA3D Finite Element Nethod
12.
Design Of Rotary Ultrasonic Machining Equipment And Research On New Type Of Ultrasonic Horn
13.
Study On Interface Properties Of Carbon Fibers Reinforced Composites By Ultrasonic Surface Treatment
14.
Research On Mechanism Of Preparing Semi-solid Aluminum Alloy Slurry And Forming Of Microstructure With Power Ultrasonic
15.
Research On Ultrasonic Elliptical Vibration Cutting Theory And Design Of It's Device
16.
Optimum Design Of Ultrasonic Horns And Research Of Experiments On Ultrasonic Machining Mechanism
17.
The Experimental Study Of Ultrasonic Shot Peening Based On The Composite Horn With Large Amplitude Ratio
18.
Study On Acoustic System And Process Of Ultrasonic Inner Circle Polishing Without Abrasives
19.
Study On Influence Of Workpiece On Resonant Frequency In Ultrasonic Assisted Gear-honing System
20.
The Research Of Hot-Pushed High-Pressure Elbow's Forming Process
<<First
<Prev
Next>
Last>>
Jump to
