Hole drilling - Globe Thesis

Keyword [Hole drilling] Result: 141 - 160 \| Page: 8 of 10
141.	The Research On Deep Roundness Error Prediction Based Oh T-S Fuzzy Support Vector Machine Method
142.	Temperature Distribution And Thermal Deformation Study Of Deep Hole Parts Based On Reverse Tracing Method
143.	Optimal Design Of Horizontal Well Structure For Tight Sand Gas
144.	Study On The Improvement Of Ti6A4lV Titanium Alloy Gun Drilling Technology For Small Diameter Deep Hole Drilling
145.	Exploratory Study Of Micro-hole Drilled By Micro-EDM In Powder-mixed Dielectric
146.	Study On Comprehensive Gas Control And High Efficiency Sealing Technology In Wulunshan Coal Mine
147.	Research And Design Of Economic And Automatic Double-axis Deep Hole Drilling Machine
148.	Numerical Simulation And Test Study On Residual Stresses In Beam Of CNC Gantry Boring And Milling Machines During Manufacturing
149.	Research On Gas Pressure Measurement Technology For Super Long Boreholes
150.	Research On Residual Stress Measurement And Vibration Stress Relief Of Sheet Metal
151.	The Numerical Simulation And Experimental Study On Micro-hole Drilling Of Superalloy Based On The Orthogonal Experiment
152.	Small Hole Drilling Force And Process Parameters Optimization Of Carbon Fiber Reinforced Plastics
153.	Static And Dynamic Characteristics Analysis And Toplogy Optimization For Three-coordinate Vibration Deep-hole Drilling Machine
154.	Simulation And Experimental Study On Mechanism And Drilling Force Of Tooth For BTA Deep Hole Drilling
155.	Deep-Hole Drilling Experiment On Nuclear Tube Sheet And Analysis Of Machining Quality
156.	Seif Guide Mechanism Research And Drilling Process Parameter Optimization Of Staggered Teeth BTA Deep Hole Drilling
157.	Research On Sensorless Monitoring Technology Of The Drill Wear State In The BTA Deep-hole Drilling Process
158.	Research On BTA Drill Bit Wear Monitoring Technology Based On LSTM Recurrent Neural Network
159.	Reasearch On Design And Optimization Methods For BTA Deep Hole Drilling Tool
160.	The Control Methods For The Rotation Angle Of Hydraulic Anchor-hole Drilling Arm
<<First <Prev Next> Last>> Jump to