Font Size: a A A
Keyword [Geometric characteristics]
Result: 1 - 20 | Page: 1 of 2
1. Research Of Geometric Characteristics And Shaping Control Of Formed Structure In Laser Remanufacturing Equipment Parts
2. Synthesis Of Mesoporous SiO2 And Relating Hybrid Aerogels System
3. Research Of Intelligent Toolpath Strategies For Freeform Surface Machining Based On Surface Geometric Characteristics Analysis
4. Research On Inherent Properties And Mechanical Performances Of Wire Rope
5. Geometric Characteristics Of The New Bit Of Analysis And Experimental Study
6. Study On Geometric Characteristics And Fininte Element Anslysis Of Hositing Ropes
7. Study On Diversion Capacity Of Acid Fractures Based On Digitized Characterization Of Etch Patterns
8. An Envelope Shaping Method Research For Outsize Straight Bevel Gear
9. Study On The Bionic Design Of The Working Surface Of The Colloid Mill Head Based On The Geometry Of The Bovine Molar
10. Experimental Study On Free Settling Velocity And Floating Velocity Of A Single Coarse-grained Ore
11. Study On Flow And Slip Instability Mechanism In Rough Rock Fractures Under Hydro-mechanical Coupling Effects
12. Application Of Low Coherence Scanning Interferometry In Measurement Of Geometric Characteristics Of Silicon Wafers
13. PIV Experimental Study On Abrupt Flow Field With Geometric Characteristics Of Roadway Section
14. Accurate Preparation Of Mesoscopic Geometric Characteristics Of Ball End Milling Cutter And Optimization Of Cutting Performance
15. Research On The Influence Of Meso-geometric Characteristics Of Ball-end Milling Cutter On Milling Behavior Of Titanium Alloy
16. Study On Tooth Surface Defects Repair Method Based On Laser Cladding Technology
17. Study On Numerical Analysis And Simulation Accuracy Of Microwave Heating Characteristics Of Food
18. Research On Pit Defect Detection And Evaluation System Based On Magnetic Flux Leakage Detection Technology
19. A Preliminary Study On Buckling Deformation Of Thin Sheet Metals Featured With Typical Geometric Characteristics
20. Automatic Welding System Based On Geometric Characteristics Of Welds
  <<First  <Prev  Next>  Last>>  Jump to