Font Size:
a
A
A
Keyword [Fracture criterion]
Result: 41 - 60 | Page: 3 of 4
41.
Fracture Prediction In Incremental Sheet Forming Based On Ductile Fracture Criterion
42.
Research On The Ductile Fracture Criterion And Spinnability Of Shear Spinning For High Strength Steel
43.
Study And Experimental Verification On Stress Striaxiality Fracture Criterion Of Metallic Materials
44.
Study On Two-point Symmetric Progressive Forming Fracture Process Of 1060 Aluminum Alloy Sheet
45.
Study On Macro-micro Mechanical Model And Ductility Fracture Criterion Of Rolled AZ31B Magnesium Alloy
46.
Failure Criterion For Hydrogen Induced Cracking Based On Fracture Mechanics Theory And Molecular Dynamics Simulation
47.
Fundamental Research On Deformation Damage And Unerring Fracture Of Plastic Hinge Of 7050 Aluminum Alloy
48.
Theory Research On Anisotropic Yield Criterion And Failure Model For The Plastic Deformation Of Light Weight And High Strength Sheet Metal
49.
Experimental Study On High Temperature Toughness Fracture Criterion Of Austenitic Stainless Steel Based On Critical Cavity Expansion Ratio Theory
50.
Research Of Automotive Aluminum Alloy Sheet Deformation Mechanism And Stamping Conditions And Crack Propagation
51.
Study On The Mechanism Of Rolling Edge Crack Of High Grade Silicon Steel
52.
An Experimental Investigation On The Influence Of Hydraulic Pulse On The Hydraulic Fracture
53.
Research And Application Of Weldox 900E Steel Constitutive Model And Fracture Criterion
54.
Calibration Methods And Adaptablity For Parameter Identification Of Ductile Fracture Criterion
55.
Hardening Behavior And Fracture Mechanism Of Al2024 Under Variable Path Loading
56.
Effect Of Process Parameters On The Formation Of Bismush-containing Stainless Steel Bars
57.
Study On Mechanical Behavior Of Al6016-T4 Sheet In Metal Forming Process And The Influence Of Pulse Current On It
58.
An Experimental Investigation On Cut Surface And Burr Height In The Trimming Process Of AA6016-T4
59.
Research On The Applicability Of Ductile Fracture Criterion Under Complex Loading Conditions In Forming Process
60.
Research On Constitutive Model And Ductile Fracture Criterion Of AA5052 At High Work Piece Speed
<<First
<Prev
Next>
Last>>
Jump to
