Forming limit diagram - Globe Thesis

Keyword [Forming limit diagram] Result: 41 - 60 \| Page: 3 of 4
41.	Research On Forming Limit Prediction Of 22MnB5 High Strength Steel
42.	Study On The Thermal Expansion Of 5083aluminum Alloy Plate
43.	Investigation On The Dynamic Mechanical Behavior And Formability Of High Strength-ductility Low Carbon Quenching-Partitioning-Tempering (Q-P-T) Steel
44.	Experimental And Crystal Plasticity Analysis On The Deformation Mechanisms And Forming Limit Of AZ31B Mg Alloy Sheet At Warm Conditions
45.	Research On Forming Limit For AA5086 Aluminum Alloy Sheet Based On Nakazima Test
46.	Theoretical Research And Numerical Simulation Of Forming Limit Line For Zirconium Alloy Sheet
47.	Study On Simulation And Experiment Of Forming Limit Diagram Of 22MnB5 Steel Sheet At Warm Temperature
48.	Investigation On Hot Formability Of 5A90 Al-Li Alloy Sheet And Its Experimental Verification
49.	Study On Mechanical Behavior And Process Of Ti/Al Clad Plate In Deep Processing
50.	Investigations On The Hot Blanking Process And Fracture Mechanism Of Boron Steel B1500HS
51.	Study On Thin Aluminum Fins Forming And Opimization
52.	Study On The Influence Of Electroplastic Effect On The Forming Limit Of 5A90 Al-Li Alloys
53.	Research On Forming Limit Of Aluminum Alloy Sheets Based On Different Stress-strain Curve Models
54.	Yld2000-2D Parameters Identification With Heterogeneous Strain Field And Forming Limit Diagram For Aluminum Alloy
55.	Theoretical And Experimental Study On Prediction Of Plastic Forming Fracture Of 7075 High Strength Aluminum Sheet
56.	The Complex Deformation Law Of Sheet Metal Under Macroscale And Mesoscale Condition
57.	Research On Incremental Forming Of Aluminum Alloy Sheets For Automobiles
58.	Research On Forming Limit Diagrams Under Different Loading Paths
59.	The Research On The Forging Penetration Of The Barrel And The Under-forging Rim And The Establishment Of The Forming Limit Diagram
60.	Research On Room Temperature Forming Behavior Of Q235 Carbon Steel/410/304 Stainless Steel Composite Plate
<<First <Prev Next> Last>> Jump to