Fixed-Abrasive - Globe Thesis

Keyword [Fixed-Abrasive] Result: 81 - 96 \| Page: 5 of 5
81.	Study of fixed abrasive polishing and characterization of diamondlike carbon film as a low-k material
82.	Study On Abrasive Water Jet Dressing Technology Of Fixed Abrasive Lapping Pad
83.	Research On Design And Performance Of Surface Grinding Tool Based On Random-grid
84.	Influence Of Resin Properties On Processing Performance Of Fixed Abrasive Pads
85.	Optimal Design And Experimental Study Of Fixed Abrasive Pad Based On Three-dimensional Abrasive Trajectory
86.	Mechanism Of Oxygen Enrichment In Micro Region Of Single Crystal Si C Substrate By Tribochemical Mechanical Polishing With Fixed Abrasive
87.	Study On Grinding And Polishing Process Of Commercial Pure Titanium Based On Fixed Abrasive
88.	Design And Experimental Study On Magnesium Oxychloride Bonded Diamond Pad With Phyllotaxis Grooves
89.	Experimental Study On Fabrication Of Fixed Soft/Hard Abrasive Pellet Combined Plate And Sapphire Lapping
90.	Study On Composition Optimization And Performance Of Self-Retreating Fixed Abrasive Polishing Pad
91.	Study On The Surface Glazed Phenomenon Evaluation Method And Improvement Mechanism Of The Fixed Abrasive Lapping And Polishing Pad
92.	Kinetics Of Oxidation Reactions On Single Crystal SiC Substrate Surfaces By Tribochemical Mechanical Polishing With Fixed Abrasive
93.	Contact Mechanism Of Self-regressive Fixed Abrasive Polishing Pad In Chemical Mechanical Polishing
94.	Study On The Characteristics Of Friction Signal Between Workpiece And Abrasive Pad In Fixed Abrasive Lapping
95.	Study On Preparation And Application Vitrified Agglomerated White Fused Alumina Abrasives Of Bond
96.	Fixed Abrasive-Based Study On Grinding Process Of SiC Mechanical Seal
<<First <Prev Next> Last>> Jump to