Font Size:
a
A
A
Keyword [FeedForward]
Result: 101 - 120 | Page: 6 of 7
101.
Identification and control of high-speed machine tools
102.
Research On Tracking Control Of Vibration Displacement Of Continuous Casting Mold Under The Constraint Of One-Direction Rotation Of Motor
103.
Research On Dynamics And Drilling Control Of The Slide Drilling System
104.
The Simulation Research Of GGZ-18 Strander Automatic Loading Robot
105.
Thickness Prediction Of Hot Strip Rolling Based On Machine Learning And Feedforward Correction Of Regulations
106.
Adaptive Sliding Mode Control And Feedforward Parameter Self-tuning Of Wire Bonding Machine XY Motion Platform
107.
Research On Modeling And Compensation Technology Of NC Machine Tool Feed Axis Reverse Error
108.
Research On Active Control Technology Of Magnetic Bearing
109.
Development Of System Identification Module For Three Axis Engraving And Milling Machine Based On PMAC
110.
Research On The Compensation Of The Feed Servo System Under The Low Speed
111.
Study On Cooperative Control Of Temporal And Spatial Coupling Temperature Field In The Preheating Zone Of The Pellets Grate
112.
Blast Furnace Gas Gas-steam Combined Cycle System Modeling And Load Control System Design
113.
Research On Source Terms Inversion Of Nuclear Accident Based On Deep Learning
114.
Research On Advanced Control Technology Of Post-combustion CO
2
Capture System
115.
Optimization Of SCR Denitration Control System Based On Stepwise Generalized Predictive
116.
Modeling And Optimal Control Of SCR Denitrification System For Thermal Power Unit
117.
Research On Hysteresis Characteristics Of Piezoelectric Ceramic Stage Based On Neural Network
118.
Research On Control Strategy Of Anode And Cathode Pressure Balance Of Fuel Cell Power System
119.
Mechanical Model-Based Decoupling Register Control For Roll-to-Roll Gravure Printing Systems
120.
Research On Comtrol Strategy Of Traction Device For Reciprocating Pultrusion Molding Line
<<First
<Prev
Next>
Last>>
Jump to
