Faces - Globe Thesis - Globe Thesis

Keyword [Faces] Result: 1 - 20 \| Page: 1 of 6
1.	Basic Study On Technology Of Pre-blast Weakening Hard Top-coal In Fully Mechanized Caving Faces
2.	Evaluation And Manufacture Of Grading Bamboo And Chinese Fir Laminated Lumber Of Wind Turbine Blades Materials
3.	Study On The Evolvement Law And Control Technology Of Rock Deformation Around The Gob-Side Entry Of Fully Mechanized Top-Coal Caving Faces In Deep Mines
4.	Nonlinear Characteristic Analysis And Study Of The Theory For Prediction And Simulation About Gas Emission In The Working Faces Of Coal Mine
5.	Ultra-low Permeability Sandstone Reservoir Description And Numerical Simulation Applications
6.	Study Of The GIS-Based 3-D Visualization Information System About Mining Working Face
7.	Application Study On Methane Predicting Technology For Fully Mechanized Winning Faces Of Pingdingshan Coal Mining District
8.	The Study Of Preventing And Extinguishing Technique Against Spontaneous Combustion Of Coal In The Fully Mechanized Ultra-long Top-Coal Caving Face
9.	Characteristics Of Surrounding Rock And Support Design Procedures In Working Faces Of Strong Roof And High Ground Pressure In Deep Mines
10.	Researches On Around-Rock Control Techniques Of The Fully-Mechanized Faces And Roadways Under Large Mining Height
11.	Study On The Monitoring And Control System Of Multi-local Fans Of The Heading Faces Based On PROFIBUS-DP Field Bus
12.	Electrochemical Finishing On Gear End Faces And Study Of The Distribution Of Electic Field And Flow Field
13.	Study On The Integrated Control System Of Local Fan In Underground Heading Faces Based On AT89C52
14.	Study On Protecting Entry Techniques Under Anomalistic Pillar Conditions In Hong-Hui NO.4 Mine Fully Mechanized Caving Faces
15.	Study On Technology Of Hard And Thick Top-coal Weakening In Fully Mechanized Caving Faces In Binchang Mining District
16.	The Study Of Compositive Extinguishing Technique For Coal Spontaneous Combustion In The Fully Mechanized LTCC No.7321 Overly Long Faces
17.	Optimization Of The Machining Technology For Crankshaft Thrust Faces
18.	Study On The Integrated Control System Of Multi-loal Fans In Underground Heading Faces Based On PLC
19.	The Dynamic Characteristic Analysis Of The MB4250-2 Hing-Precision Control Vertical Honing Machine
20.	The Study Of Deep Hole Coal Seam Water Injection In Coal Mining Faces
<<First <Prev Next> Last>> Jump to