End Mill - Globe Thesis

Keyword [End Mill] Result: 41 - 60 \| Page: 3 of 7
41.	The Study On Intelligent Detecting Technology Of Ball-End Mill Wear
42.	Study On The Simulation Of Cutting Process And Structure Optimization Of Spiral Groove Tool
43.	Toolpath Planning Of Ball-End Mill And Off-Line Optimization Of Cutting Parameters In NC Milling Process
44.	Modeling Simulation And Testing On Ball-End Milling Of Jointed Hardened Steels
45.	Research On Fundamental Design Theory And Grinding Technology For Micro End Mill
46.	Parametric Design And Side-Edge Process Modeling Of End Mill
47.	Research On Failure Analysis And Design Theory For Micro End Mill
48.	Multi-scale Characterization And Simulation Of The Milling Surface Topography
49.	Cutting Edge Design And Manufacturing Of Non-ball End Mills And Tool Path Generation Algorithm
50.	Research On The Temperature Field And Dynamics Characteristics Of Heat Pipe End Mill
51.	Parameterized Design And Optimization Of Solid Carbide End Mills
52.	Research On Structural Optimization Of PCD Micro End Tool
53.	The Key Manufacturing Technology Of Micro End Tool Of Poly-Crystalline Diamond And Some Micro-milling Test
54.	The Application Fundament Research Of HSK Shrink Fit Collects Which Is Used In High Speed Machining
55.	Prediction Of Cutting Force In3D Curved Surface Milling Based On A Semi-Analytical Cutter Workpiece Engagement Model
56.	Influences Of End Mill Geometric Parameters On Milling System Dynamics
57.	Research On Parametric Design Technology Of Special Types Of The End Mill
58.	Research On Grinding Trajectory Modeling And Programming Of Integral Flat-end Mill
59.	The Design Of Micro PCD Ball End Mill For Repairing Defects On KDP Crystal Surface And Processing Experiment Of KDP Crystal
60.	Modeling And Simulation Of Milling Force Of Ball-end Mill In Multi-axis Linkage NC Machining
<<First <Prev Next> Last>> Jump to