Element diffusion - Globe Thesis

Keyword [Element diffusion] Result: 1 - 20 \| Page: 1 of 4
1.	Microstructure And Element Diffusion In Welding Interface Of Mg/Al Active Dissimilar Materials
2.	A Fundamental Study On Combustion Synthesis Welding Of Ni-Al Metal Powder Materials And Steels
3.	Study On Diffusion Welding With Low Temperature Of Al Alloy And Stainless Steel And Diffusion Behavior Of Main Elements
4.	Study On The Surface Aging-hardened High Speed Steel Of 25Cr2Mo2v
5.	Research On The Matching Of Cutting Tools And Workpieces Of Titanium Alloys Machining
6.	Microstructure And Element Diffusion Behavior Of Fine-grained Titanium Alloy After Superplastic Diffusion Bonding
7.	Researches On Preparation And Mechanism Of Pre-plating For Metal-ceramic Composite Coating
8.	Research On Tool-chip Stick Welding And Stick Welding Surface Dynamic Characteristics For Cutting2.25Cr1Mo0.25V
9.	Lead-free Solder Joint Interface Compound Layer Growth And Element Diffusion Behavior
10.	Fabrication And Performance Of Novel Solid Oxide Fuel Cell Anodes With Fe Interlayer
11.	Microstructure Evolution And Diffusion Behavior In Dry Sliding Friction-induced Deformation Layers Of T10/20CrMnTi Tribopairs
12.	Mechanism Of Solid-state Reaction At The Interface Between Inclusion And Steel Matrix During Heat Treatment At 1473K
13.	Interface Diffusion And Electromigration Regularity Of Cu/SnAgCu/Cu Micro Solder Joints Under Electro-thermal Coupling
14.	Study On The Influence Of Recrystallization Organization Of Supersonic Plasma Sprayed High Aluminum Bronze Coatings By Induction Remelting
15.	The Formation Mechanism Research Of Fe/AL Dissimilar Materials Bonding Iterface
16.	Study On Diffusion Bonding Of Mg Alloy And Al Ally By Using Silver As Interlayers
17.	Microstructure And Element Diffusion In Welding Interface Of AZ31B/Cu Dissimilar Materials
18.	Study On Geometrical Size Of Microsolder Joints And Behavior Of Interfacial Element Diffusion
19.	Research On Formation And Prediction Of Sticking Failure For Carbide Tool In Cutting2.25Cr1Mo0.25V
20.	Mechanism Research On Laser Cladding Pure Metalon Titanium Alloy
<<First <Prev Next> Last>> Jump to