Drilling performance - Globe Thesis

Keyword [Drilling performance] Result: 1 - 20 \| Page: 1 of 2
1.	The Investigation Of Drilling Performance Of Short Fibre-reinforced PEEK Composites
2.	Performance Of Ultrafine Particles In Drilling Fluid
3.	Fabrication And Performance Evaluation Of The Brazed Diamond Thin-wall Drills Of Small Diameter
4.	Research On Drilling Performance Of Parabolic Slot Type Deep Hole Drill By DEFORM-3D
5.	Conglomerate Layer Drillability Test And PDC Bit Drilling Performance Research
6.	Study On The Fabrication Of High-performance Diamond Coatings And Their Application In CFRP Drilling
7.	Effects Of PVD Coated Treatment On Mechanical Properties Of Micro Drills
8.	Device And Experimental Study On High Speed Vibration Drilling Of Micro Hole
9.	Effect Of The Groove Parameters On The Drilling Performance Of The Surface Micro-Textured Twist Drill
10.	Thermal Aging Experiment And Numerical Simulation Study Of Stator Rubber Bushing Of Screw Drill
11.	Study On Drilling Performance Of Hydraulic Deep Penetration Drilling System And Optimization Design Of Key Components
12.	Small Hole Drilling Performance Study Of New ?-type Titanium-zirconium-niobium Alloy For Biomedical Purposes
13.	Study On Selective Laser Melting Forming Technology And Drilling Performance Of Medical Micro Drills
14.	Basic Experimental Study On Machinability Of Titanium Alloy By Laser Increasing
15.	Deep-Hole Drilling Experiment On Nuclear Tube Sheet And Analysis Of Machining Quality
16.	Discussion Of Test Methods And Influence Factors Of The Drilling Performance In Quilt Filled With Chemical Fiber
17.	Study On Drilling Performance Of Silicon Carbide With Different Microstructures
18.	Experimental Research On Additive Forming And Drilling Of TC4 Titanium Alloy
19.	Research On The Drilling Performance And Tool Wear Characteristics Of Difficult-to-cut Materials
20.	Study On CFRP Drilling Performance Of Multilayer Brazing Sleeve Drill
<<First <Prev Next> Last>> Jump to