Diffusion coefficients - Globe Thesis

Keyword [Diffusion coefficients] Result: 21 - 40 \| Page: 2 of 3
21.	Inter-diffusion In Molten Ce-Al And Ce-Al-Cu Alloys
22.	Study On The Alkali Diffusion And Permeation Properties Of Autohydrolyzed Poplar Sapwood Chips
23.	Preparation And Physiochemical Properties Of Alkyl Glycoside Tartrate
24.	Polyanion-type Compounds As Cathodes For Sodium Ion Batteries:From Materials Design To Device Manufacture
25.	Stability And Time-Depth Dependency Of Chloride Diffusion Coefficients
26.	Numerical simulation and experimental study of solvent injection in heavy oil reservoirs
27.	Development and test of an on-line coupling of thermodesorption with fast gas chromatography for studies of N-alkanes in atmospheric particulate matter
28.	Experimental and atomistic simulation studies of water sorption in polyaniline
29.	A first-principles methodology for diffusion coefficients in metals and dilute alloys
30.	Mixed gas sorption and transport study in solubility selective polymers
31.	The effect of salt on the chemical potential of neutral macromolecules determined by ternary diffusion coefficients
32.	Measurements of molecular diffusion coefficients of carbon dioxide, methane and propane in heavy oil under reservoir conditions
33.	The measurement of precise solute diffusion coefficients in molten metals and semiconductors
34.	Diffusion coefficients and mechanical properties of polymerizable lipid membranes
35.	Modeling of dry spinning of polymer fibers
36.	Revised vapor diffusion coefficients and an improved ion chromatography method for detecting acetic and formic acid vapor
37.	Analysis of the protein-salt coupled transport: Precision measurements of multicomponent diffusion coefficients for aqueous lysozyme solutions containing chloride salts at 25°C and in conditions relevant for crystal growth
38.	Contaminant transport through geosynthetic clay liners and a composite liner system
39.	Hygrothermal modeling and testing of polymers and polymer matrix composites
40.	Mass transfer from bypassed regions during gas injection processes
<<First <Prev Next> Last>> Jump to