Font Size: a A A
Keyword [Die Structure]
Result: 41 - 60 | Page: 3 of 4
41. Research On Structure Optimization And Parameter Optimization Of Complex Aluminum Extrusion Dies
42. Research On Fatigue Life And Optimization Of Die Structure Based On The Whole Process Of Forward Extrusion
43. The Research On Hot Stamping Die Structure Design System Of High-strength Steel
44. Die Cavity Design And Process Parameters Optimization On The Composite Continuous Deformation Of Direct Extrusion And Bending Shearing Of Mg Alloys
45. Numerical Simulation Of Extrusion Process For Hollow Section Aluminium Profile With Long Cantilever And Its Die & Technics Optimization
46. Research On The Characteristics And Technology Application Of ECAP-processed Magnesium Alloy
47. Optimum Design Of Base Die For Submersible Pump Based On HSACE
48. Research On Hydrostatic Extrusion And Die Structure Design Of Magnesium Alloy
49. Optimization Of The Stamping-forging Hybrid Forming Process And Die Structure For Countersunk Hole
50. Research On Digital Design Of Stamping Die For Special Strip Based On Finite Element Analysis
51. Study On Melt Impregnation Of Continuous Carbon Fiber Reinforced Polypropylene Resin
52. Influence Of Hollow Divided Flow On Filling Behavior Of Bulk Forming And Its Application In Synchronous Ring Forging
53. Research On Cr12 Vanadizing Treatment Process And Stamping Die Structure Design Based On PDX
54. Research On Precision Forming Process Of Multi-stage Warm-cold Extrusion For Outer Race Of Constant Velocity Universal Joint
55. Research On Energy Consumption Modeling And Optimization Of Aluminum Profile Extrusion Process Based On Genetic Algorithms
56. Stamping Process Analysis And Die Design Of Light Truck Top Cover Outer Plate
57. Study On Extrusion Forming Law And Process Optimization Of Thin-walled Longitudinal Reinforcement Components With High Strength Aluminum Alloy
58. Research On The Structural Deformation Anlysis And Compensation Technology Of Automotive Panel Stamping Die
59. Blown film extrusion of LCP/PE blends using a counter-rotating die: Structure-property-process relationships
60. Research On Forging Forming Technology For Gear-Shaft In Yaw System Of Wind Turbine
  <<First  <Prev  Next>  Last>>  Jump to